0
Add your answer:
Earn +20 pts
What is the correct ignition timing for a mercruiser 470 engine?
Timing for Mercruiser 470 is 8 BTDC at idle speed. Mercruiser Service Bulletin specifies 4 degrees BTDC, due to new gasoline formulation.
What is the dwell for a mercruiser 470?
34-36 degrees Sterndrives.com
What fram oil filter fits the mercruiser 470?
ph5
What is the propeller size for a mercruiser 470?
the stock size is a 14.75 x 21 ptich
What are the color bands for a 470 ohm resistor?
yellow-violet-brown
What does 470R mean?
it means 470 resistor and is used in many circuit boards.
Where is the heater resistor coil located on a 2006 t300 kenworth?
The heater resistor coil is located on the blower motor on the 2006 T300 Kenworth.
How to identify a 470 ohm resistor?
Resistors are color coded to denote the value of the resistor as well as the multiplier. In your case a 470 ohm would be colored as Yellow Violet Brown corresponding to 4, 7 and a multiplier of 10^1.
Where is a coil resistor located on a 1984 dodger ram charger?
helpful hint coil resistor condenser is usually located on the intake manifold or general proximity.
Why does a Led have a 470 resistor connected to the LED?
A: That resistor is there to limit the current to the LED it can be any value if the voltage is decreased or increased or no resistor if the voltage across the led is equal to the forward voltage drop.
How do you change coil on 170 mercruiser motor serail B435880?
By following the steps in the repair manual would be the very best way.
How do you change the coil resistor on a 1988 raider?
the coil resistor is a ceramic block on the top of your coil, you just remove the wires attach to it, put some grease on the bolts(on the new one) that attach the wires, and put it back together, to see if your resistor is faulty, just run a wire from 1 pole to the other, make sure you have a good contact.
