I had to replace mine and it was under the car on the passenger side between the firewall and the transmission. It is quite easy to change
*WARNING* when you take it out be sure to have something to catch the Transmission Fluid. After all the research I did and mechanics I talked to I was not told of this happening until I changed it. Over all its not hard to change but again when you pull it out transmission fluid will come pouring out!!!! Let me know if this helps or not.
2010 chevy malibu intake position sensor
is it difficult to change the fuel sensor on a 2007 Chevy Malibu
fuel shut off sensor located on Chevy Malibu
it tells the cars pcm what gear the transmission is in. it also will not let the car start unless the transmission is in neutral or park.
The 2003 Trailblazer speed sensor is mounted on the transmission. It is on the passenger side of the output end.
Where is located pressure sensor on Chevy Malibu 1999
If it is 4WD it will be on the output housing (rear) of the transfer case. If not 4wd it will be on the output of the transmission. Typically has two wire connector.
To change the transmission fluid on your Chevy Malibu 2005, first, pull off the pan, drain the fluid, and replace it.
The 2004 Chevy Malibu crankshaft position sensor location is dependent upon the type of engine. In most cases the crankshaft position sensor is on the back of the engine.
The 1997 Chevy Malibu crankshaft position sensor can be found on the back of the engine. You will need to remove the rear engine cover in order to access the crankshaft position sensor.
Dexron
Dextron