is on the transmission
It is the two wire sensor on the same side as the cooler hoses, closest to the engine.
The input and output speed sensors are located on the front of the trans. They have two wires and the input sensor is closer to the engine.
The abs wheel speed sensors are at each wheel bearing. The transmission has an input and output speed sensor mounted on the front of the transmission case. The vehicle speed signal comes from the transmission computer via the output speed sensor.
I have a 1999 sebring and i had to replace my speed sensor. there are two sensors one located on the transmission that's the internal one and the other one is just off the drivers front wheel well, you have to pull the tire off.On the transmission, there are two,one input and one output. If the speedometer operation is the problem the output sensor is the problem is located on the driver (Left)side of the transaxle.
On the driver side of the transmission case there are two sensors that have two wires going to them. The input sensor is the one closer to the front.
It is on the front of the transmission, between the cooler hoses.
There are two sensors located on the driver's side of the transmission. there is an input and and output sensor. You can get to them from the underside of the car.
It is in between the cooler hoses on the front of the transmission.It is in between the cooler hoses on the front of the transmission.
There are two speed sensors, an input and output. They are located on the transmission. If the problem is the speedometer not working it is the output sensor located on the driver side of the rear of the transmission.
They are the two wire sensors on the front of the transmission case. The input is closer to the engine.
It is a sensor on the transmission that reads the rotational speed of the input shaft.It is a sensor on the transmission that reads the rotational speed of the input shaft.
Where is my veh.speed sensor input location
Trouble code P0113 means:Intake air temperature circuit high input