For the 3.5 L motor. Looking at the engine from the front of the car, the camshaft position sensor is located on the left side of the rear head. If you remove the coolant overflow container, you will be able to find it very easily. You will need a 10mm wrench of socket to remove the set bolt, then with a flat screw driver you can very gently pry it out. Just pop the new one in and tighten the bolt. Be careful when attaching the plug.
where is the camshaft position sensor located on a 1999 Oldsmobile intrigue
See related answers
The Camshaft Position Sensor is located behind the Power Steering Pump.
I have a 98 olds intrigue...the camshaft position sensor is located around the middle polley on the left side of the engine. It has one screw. It's fairly easy to install.
Were. Is the oldsmobile intrigue relay switch. Loocated
where is the crank sensor located on a 2002 Oldsmobile intrigue 3.5
It is located beneath the power steering pump in the engine block
On the 99 Olds Intrigue, the camshaft sensor is located on the rear of the engine. It is just above the starter.
The camshaft sensor on the 99 Olds Intrigue is located on the engine block. It is under the starter, which has to be removed to locate the camshaft sensor.
The 1999 Oldsmobile Intrigue coil pack is located on the firewall, in the engine compartment. The coil pack will be on the passenger side of the firewall.
Behind the glovebox.
where is the starter relay located??