Bank 1 is the drivers side head. The sensor you want will be screewed into the drivers side exhaust pipe and will be the 2ed one back towards the muffler in the drivers side exhaust pipe.
On the exhaust header. Normally the drivers side. On the exhaust header. Normally the drivers side.
On the 98 u have two oxygen sensors an upstream and a downstream. The upstream oxygen sensor is located closer to the front of the truck by the transmission. The downstream oxygen sensor is located on down torwards the back of the truck along the side of the frame.
The vehicle speed sensor, on your 1994 Chevrolet Silverado pickup truck, is located on the back of the transmission. The speed sensor is labeled as such.
The oxygen sensor on a b2500 Mazda is located in the exhaust. It is under the truck about even with the transmission.
the oxygen sensor is in the exhaust manifolds, there should be one for each side
If the Nissan truck is either a V6 or a V8, the oxygen sensor will be located in the manifold. Sometimes it will be placed just below the manifold.
The oxygen sensor on a 98 Chevy K1500 truck is located in the exhaust manifolds. It monitors oxygen levels in the exhaust gases and allows the computer to make adjustments for optimal performance.
O2 sensor in the exhaust manifold near the engine
It doesn't have an oxygen sensor.
It is screwed into the passenger side of the engine block between the starter and motor mount. You will have to get under the truck to be able to see it
Need to know what size engine.V6, Vortex 4.3
the air temp sensor should be located on the radiator support behind the grille. Sometimes around the headlight area or attached to the center/ latch supports