answersLogoWhite

0


Best Answer

call the dealer or a dealer and have them email you one they sent me one

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Where can find a routing diagram for serpentine belt and pulley on a 2002 Camry 4 cylinder?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace a serpentine belt on a 2005 ford freestyle?

Loosen the tensioner pulley. Slide the tensioner pulley to the right. The serpentine belt will come loose and can be removed. Reverse the process to install the new belt.


Where can you find the diagram of the routing of a serpentine belt for a 1996 Pontiac grand am 6 cylinder engine with air conditioning unit?

If you do not have a routing (belt) diagram under your hood for some reason or other . Just go to any auto parts store and ask for a copy of routing diagrams from either their Gates Serpentine books or whoever supplies them with their serpentine belts . But they DO have that information . You will have to know how many pulleys your vehicle has though,so draw out your pulley position on a piece of paper! THIS IS A MUST in order to get the right route.


How do you replace a serpentine belt on a 1993 Dodge Caravan?

Loosen the tensioning pulley and install new belt. There should be a routing diagram in engine compartment or on hood.


How do you replace the serpentine belt on a Ford E150 Van 1995 4.9 no AC 6cly does someone have a routing diagram?

There should be a routing diagram under the hood. If not, take a digital picture of it before removal. Pry the idler pulley back and the belt slips right off.


Where is a serpentine belt routing diagram for a 1994 ford F150?

I need a diagram for a serpentine belt for a 1994 f150 with 5.0 engine I need a diagram for a serpentine belt for a 1994 f150 with 5.0 engine There should be a sticker near radiator shroud that has belt routing. If not stick the belt down past the right side of fan/water pump .put belt on crank pulley then pull back of belt over water pump and then down around power steering pulley and up over compressor pulley. put belt from crank pulley around smog pulley then up to tensioner with back of belt around tensioner and then around alternator pulley.next put rachet and socket(15 mm) on tensioner and pull on it while placing belt under idler pulley.


Routing on a serpentine on 1999 grand am?

THERE IS A STICKER ON THE LEFT SIDE ON TOP OF THE PULLEY'S IT SHOWS YOU HOW TO THREAD IT.


What is the serpentine belt routing diagram?

Assuming you have a 91 to 02 LX with AC, power steering and alternator the belt starting with the tensioner on top then it goes clockwise to the alternator, power steering, idler pulley, A/C, crankshaft pulley---------back to the tensioner.


How do you replace the tensioner and serpentine belt on a 1996 Saturn SL2?

The serpentine belt you can look at the diagram in your engine compartment for actual routing. The tensioner mounts to the left side of the engine. You need to unbolt the whole assembly. Actually, the belt can be loosened by tightening the bolt of the tensioner pulley. When fully tightened, the pulley will act as a swivel.


What is the serpentine belt diagram for a 1993 Plymouth Voyager?

If you need a diagram to figure out the routing then you should not mess with it! Hint: It's serpintine! That means that first it runs over a toothed pulley and then it runs over a smooth pulley. The biggest pulley is the crankshaft and is toothed because it drives the belt.[[User:67.86.249.138|67.86.249.138]] 02:33, 1 Mar 2009 (UTC)Get it?


How do you replace a serpentine belt on a 1988 celebrity?

To replace the serpentine belt on a 1988 Celebrity: 1. There should be a routing diagram in the engine compartment. If there is no routing diagram take careful note of how the belt to be replaced is routed. 2. Use a suitable tool to release the belt tensioner, then slide the belt off of the idler pulley and then off of the other pulleys. 3. Route the new belt on all the pulleys to the tensioner. 4. Release the tensioner and slide the belt over the idler pulley.


Where do you find a diagram for the serpentine belt on a 1999 escort ZX2?

excuse the poor drawing never claimed to be an artist but this is the routing for a 9 pulley system http://img266.imageshack.us/img266/3710/44701920.png


Is there a tensioner pulley on a 1992 cavalier 4 cylinder for changing the serpentine belt?

Open the hood and look. If it has a serpentine belt there is a tensioner.