the vortec block and heads were introduced in late 1995 but actual vortec motor started coming in vehicles in 1996
Yes.
Regardless of the block, you have to use Vortec heads to use a Vortec intake.
The heads will fit the block, but the vortec intake manifold will not bolt to the old style heads.
Yes the heads will, But the problem is that the vortec intake won't bolt up to the pre- 90 heads. DIFFERENT BOLT PATTERN.
The 1995 350 or 5.7L has a T.B.I. and standard heads. 1996 its a C.P.I. and Vortec heads.
will 1995 Chevrolet 350 intake fit a 1997 vortec heads
1996
No because the ports on a tbi head are different than the ports on a vortec head, vortec heads need a vortec intake however you can switch a carburated engine to a tbi engine because the heads are the same
the fastest way to tell is if the center intake bolts are not there.the vortec heads that everyone wants for performance have no center intake bolts.
Yes they will with no problems. They are basicly the same heads, Just different CCs.
it will work I have vortec heads on a 72 400 small block, I had to get the heads reworked for the 400s water ports or steam port and a vortec type style intake will be needed