0
When you have a problem with a USB device what is the simplest way to determine that the USB port is good?
Wiki User
∙ 12y ago
First try moving the device to another USB port!!!
Check that the usb device is functional in the Device Manager.
some USB devices don't appear in Device Manager use the utility program that came bundled with the device to check for errors.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
When you have a problem with a USB device what is the simplest way to determine that the USB port is not causing the problem?
Put a known good device in that port...process of elimination!
When you have a problem with usb device what is the simplest way to determine that the usb port is good?
One of the simplest ways is to use USB flesh drive, keyboard or mouse. Just connect to the port in question and try to use the device. If it works then the port is OK, otherwise you have found the port (or one of them) causing the problem.
When you have a good usb device what is the simplest way to determine that the usb port is good?
Plug two or three devices into that port if none of them work the port is defective.
How do you determine if a usb port is still good?
You check if a usb device e.g. flash memory works in a good port. If it works, do that in the port you'd like to determine and see if your device is found.
Why is your iPod not chargeing?
There are a number of reasons that iPod are not recharging. The simplest is tha device is not connected to a computer and running the iTunes software. Cables for recharging can be damaged. If this solves the problem that good. If the device still will not recharge then take it back to the store you bought it from or an Austhorise Apple Service Centre or Genius Bar at your local Apple store
Why having a flat network is a problem for larger networks?
If you are referring to a flat network protocol such as NetBEUI, the problem in a large network is that the device names must be unique (up to 15 characters). In a large network there is a good chance of attempted duplication of the name, which is not allowed. For example, if a device is called "john" in the network, then no other device could have that name. It would have to be "john1" or something that makes it unique.
What is fail over?
Fail-over is a term used with fault tolerance. It refers to the ability of a device or system to continue to work after a problem has been detected by using a backup or redundant device. The term refers to detecting a failing component and having the other component to the work (failing over to a good device).
Which gps services have the highest customer satisfaction?
To determine which GPS device has the best service will depend on where you get your information. One place to find good customer reviews for consumer electronics is amazon.com and newegg.com.
How do you make a sundial time telling device?
Good question. The simplest one is to fix a stick pointing out from a sun-facing wall of your house. The point of the shadow you can then calibrate. Old farm buildings sometimes have these.
When to use the advantages of problem solving?
When facing a problem might be a good time!When facing a problem might be a good time!When facing a problem might be a good time!When facing a problem might be a good time!
What happens if i use a 12v Dc in a device that requires 9v DC And can it be repaired?
Not a good idea. It will raise the current that could burn out components. To repair you would need to determine what was burned out and how easy it would be to replace.
What are three things to try if you have problems with removable storage devices?
Load or reload the drivers for the device. Determine if it is formatted properly for your computer. Check to see if it works in another computer and connect any other device to the USB port (the one that the drive doesn't work in) to see if the port is good.
