0
What would happen if the network administrator moved the network cable of Host A from interface Fa01 to Fa03 on switch SW1?
Wiki User
∙ 11y ago
the port is disabled
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
A network administrator is replacing a failed switch with a switch that was previously on the network What precautionary step should the administrator take on the replacement switch to avoid incorrec?
Set VTP revision number to a smaller number
Which switch interface would an administrator configure an IP address so that the switch can be managed remotely?
vty 0
Which set of commands will enable a network administrator to remotely manage a LAN switch?
Switch(config)# ip default-gateway 192.168.1.254Switch(config)# interface vlan 1Switch(config-if)# ip address 192.168.1.1 255.255.255.0Switch(config-if)# interface fa0/1Switch(config-if)# switchport access vlan 1
How CAN a network administrator influence which stp switch becomes the root bridge?
4. Set the switch priority to a smaller value than that of the other switches in the network.
What benefits does of a network administrator configures the switch as an HTTP server in new switch?
This allows web-based configuration tools to be used with the switch.
While configuring a new switch a network administrator configures the switch as an HTTP server?
This allows web-based configuration tools to be used with the switch.
Can you connect computer and printer by switch?
Yes, you if you printer has network interface (NIC). u can connect them through routers or switch
What hardware does each PC need in order to be physically connected to the switch?
I guess you are talking about a network switch. You would need a NIC, Network Interface Card, and a cable.
What will happen if a Network switch is connected back into itself?
Flood the network w/ broadcast
Which part of a network interface card identifies whether or not there is basic connectivity from the station to a hub or a switch?
Link light
A network administrator enters the enable command at the Switch prompt of a new switch. What mode will the switch enter?
Privileged mode (will turn into a # sign after the router name instead of the > sign it has upon startup.
What are the requirements of LAN?
switch straight cables NIC's - Network Interface Card (for windows) choose "setup a home or small office network" from network connections window assign IP addresses for the PC's
