collapsing lifter
Do a compression test on all cylinders and compare findings. All cylinders should be within 10% of each other.
Theres three coil packs; one fires two cylinders. I suppose if one is bad then it could cause the two corresponding to misfire. I had one cylinder misfire, it turned out to be the fuel injector.
misfire on adjacent cylinders in the firing order.
You may have a burnt valve or blown head gasket. Run a compression test on all cylinders.
p0300 is a multi-cylinder misfire code it is because the logic circuit cannot determine which cylinders because they are random
bad coil pack on cylinders, find or pull ignition wires and you can tell by no loss of power.
Trouble code P0300 means:Random/multiple cylinders misfire detected
ignition coil
Trouble code P0300 means:Random/multiple cylinders misfire detected
Trouble code P0300 means:Random/multiple cylinders misfire detected
A misfire is when one of the cylinders is accelerating without actually doing anything, it's just a dead-cylinder. In order to fix this you need to tighten the cylinder or adjust the engine connector.
It means that the computer has detected a misfire in one or more cylinders.See related questions below.It means that the computer has detected a misfire in one or more cylinders.See related questions below.