0
If I had to just go from memory, and I haven't seen a neon in years... I would say 19mm for the lug nuts, 6mm or 7mm Allen for caliper bolts, flat screwdriver to aid in caliper removal and use your preferred method of pushing the caliper back ie C-clamp, channel locks, caliper depressing tool etc
Wiki User
∙ 8y ago
Wiki User
∙ 9y agoYou will need:
- A jack
- Jack stand(s) - I prefer two so I can lift and do both sides.
- Lug nut wrench
- Long thin flat tip screw driver to remove the wheel cover, AND to compress the caliper and to help release the outside pad from the caliper.
- 10mm socket wrench and ratchet, or 10mm ratcheting box end wrench, a regular box end will work but why work harder when you can work smarter.
If you've never done brakes before, it isn't difficult, but it is best to have someone familiar with the process on hand the first time you change the brakes.There are some very informative videos available on sites such as YouTube. I've linked one of these to this answer.
https://www.youtube.com/watch?v=giN6UREb39E
Add your answer:
Earn +20 pts
How do you change front brake pads on 2003 neon?
how to change front brake pads on a 2003 neon
How much would it cost to have my 2000 dodge neon front brake pads repaired at brake masters?
Front disk brake pads will usually run you $75.
How do you remove a front brake caliper on a 1995 dodge neon?
two bolts in the steering knuckle and the brake line are all that attach to the brake caliper
How do you change the brake light located in the middle of the trunk lid 2000 dodge neon?
You can access the middle brake light from the inside of your 2000 Dodge Neon cargo compartment. Remove the brake light wiring harness. Remove the brake light retaining bolts. Reverse the process to install the new brake light.
Why does My 2001 dodge neon sounds like a for horn after you brake?
You might need new brake pads or rotors depending upon how worn down your brakes are. I have a 2003 Dodge Neon SXT and I had the front brake pads replaced for $140.
What type of brake fluid for dodge neon?
A Dodge Neon use DOT3 brake fluid.
How do you install front brakes snd adjust caliper on dodge neon?
Jack the Neon up and remove the wheel. Keep the vehicle on a stand for safety. Unbolt the caliper and slide it off. Remove the brake pads from the caliper and replace them with new pads. Reinstall the caliper. The caliper is not adjustable, however you can bleed the lines for possible air in the fluid.
Will a 2003 neon brake booster fit on 1996 neon?
No, they are different
How do you replace wheel cylinders on a 1998 Dodge Neon?
disconnect the brake hose then remove the 2 10mm bolts and its off install in reverse and bleed the line
Tell how to change a front wheel bearing on a 1995 Plymouth Neon?
remove wheelremove cv shaft nutremove brake caliper and rotorremove bolts retaining bearing to spindleknock hub bearing out of spindle with big hammerreverse order to install new hub bearing
Would a timing belt off of a 98 neon fit on an 03 neon?
Do not install a used timing belt on the 2003 Neon. Install a new belt.
Dodge neon brake fluid?
dot 3 brake fulid
