answersLogoWhite

0


Best Answer

A ratchet isÊneeded to loosen the serpentine belt tension pulley on a 2002 Jeep Wrangler V6. It will require a 1/2 inch ratchet.

User Avatar

Wiki User

9y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What tool do you use to loosen the serpentine belt tension pulley on 2002 jeep wrangler v6?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

WHAT PULLEY DO I loosen to get single drive belt on?

If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.


How do you loosen the serpentine belt tension on a 2005 grand caravan 3.8L?

To loosen the tension on a serpentine belt on a 2005 Grand Caravan 3.8L, turn the nut of the belt tension pulley to loosen it. Adjust the belt, then tighten the tension pulley by turning the nut in the opposite direction.


Loosen tension on serpentine belt on a 2000 jeep Cherokee sport?

Loosen bolt in tension pulley, then loosen tension bolt. Replace belt. Tighten tension bolt. Last, tighten bolt through pulley.


What do you need to loosen to change the serpentine belt on a 4 cylinder 1998 jeep wrangler?

u need to relaese tension on the tension pulley. this is usually done with a long socket wrench handle. when u release tension and remove belt you then release tension on pulley until you have routed new belt . you then move tension pulley again until you can put belt on it, then release pulley and it will automatically provide correct tension


How do you loosen the serpentine belt on a 2002 Kia Sedona?

You could do what I did, wait for the tension pulley to fall off the van...


How do you loosen the tension pulley to remove serpe how do you loosen tension pulley to chng pw?

put it on the tension srewand push back towards muffler


How do you change the serpentine belt 97 Mitsubishi diamante?

Changing the serpentine belt on a 97 Mitsubishi Diamante is a fairly easy task. All you need to do is get a wrench and loosen the tension pulley and pull of the serpentine belt.


How do you change a serpentine belt on a 2000 gmc pickup?

Serpentine belts use an pulley to keep tension on the belt. You need a breaker bar; attach to the tension pulley and turn the nut. One way will not move and the other way will loosen the belt. It will usually then just slide off that pulley and then come off all the rest.


How do you loosen the tension for replaceing serpentine belt on 93 Cherokee?

You pry it over enough to remove the belt. You loosen the tensioner pulley bolt and thread the adjuster bolt backwards on a 4.0L.


As far as loosening the tension pulley to replace serpentine belt on a 1999 6cyl Alero is the bolt supposed to loosen?

no the bolt on the pulley does not need to be loosen just put ur wrench or rachet on the bolt head and turn either way till the pulley moves


How do you loosen serpentine belt tension on a 2000 s10?

Tensioner pulley below the alternator. Should be a 14 or 15mm socket and turn counter-clockwise.


How do you loosen the serpentine belt in a 91 LeBaron?

the Serpentine Belt on the 91 Lebaron is on Tension Pulley, you dont tighten it. But if it is loose and you need to tighten it you just go and buy a new belt and put that on.