it depends on the model. it can be between 60" up 109". the most popular is 96 1/2". Check what deck model no. you have and go from there
what model and which belt? If it is a 1000 series you have a transmission drive belt and a deck belt. I you have a 2000 series or higher or a cub cadet with an IH logo then you only have one belt the deck belt and no drive belt you have a drive shaft. So the model of the tractor and what belt needs to be given before the correct answer can be given.Phil
deck belt replacment for a 1998 cubcadet 1525
No the drive belt and Deck belt are two different belts, one powers the rear wheels, the other powers the deck. though if you are asking if they are the same belt as in same size, I don't know, you'll have to check your owners manual or talk to someone who repairs or can get parts for Cub Cadet mowers.
The drive belt on a Cub Cadet LX1040 is adjusted by turning a small bolt on the side of the cutting deck. It loosens or tightens the belt depending on the direction it is turned.
It's right on the deck
One should always consult the owner's manual before attempting such a procedure. To replace the drive belt, one must first remove the mower deck. Then remove the old belt and belt guides. Follow the belt threading diagram on the underside of the tractor to place the new belt on the tractor. Replace the belt guides and the mower deck to finish.
Gates
Disingage the mower deck take off the mower deck look under neath their and replace the belt
drive belt diagram 4211 simplicity hydro
just get new belts they stretch or buy a can of belt grip
The 3000 Series Cub Cadet supposedly have no belts, not transmission belt nor deck belts.
The primary belt is the belt tha comes off of the engine. This could be one of two belts depending on your tractor. There could be a primary drive belt and a primary deck belt. Usually the primary belt refers to the drive belt on the engine though.