0
What position does your key need to be in to tow a 2001 Chrysler Sebring?
Wiki User
∙ 9y ago
It depends on how you are wanting to tow it. If you tow it four wheels on the ground, you will destroy the transmission so the key position doesn't matter. The key would need to be one notch forward to unlock the steering.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
Hauling a Chrysler sebring 2001 with a motorhome?
You need to use a tow dolly or a trailer.
What type of oil does a 2001 Chrysler Sebring need?
The engine uses 5W30 conventional.
Chrysler sebring convertable 2000 not fiering?
my 98 Chrysler Sebring cv is not fiereing need information own what maybe causeing this problem
Is the Engine ECU on a 2001 Chrysler Sebring a simple plug-in to install?
If you have chip keys, the dealer will need to program the keys to the new PCM.
What tool is used to remove caliper pins on 2001 Chrysler sebring?
You would need a T40 Torx Bit to remover the caliper pins.
What type of gas does a Chrysler Sebring need?
87 octane
What grade of oil does a 2003 Chrysler Sebring need?
5w30
Is it hard to get to and replace the water pump on a 2001 Chrysler Sebring?
Not real hard but you need direction. Get a manual on your car from the parts store or from AUTOBOOKSONLINE.COM. It will cost about $20
Are there any engines other than the 2.7 that can be put in a 2001 Chrysler sebring lxi?
The 2.7L is the only direct fit. The Sebring could have been built with a 2.4L, but you would need the proper transmission, computers, and wiring harnesses.
How do you locate it on a 2005 Chrysler sebring touring?
Need to know what it is you want to locate.
What kind of motor oil does a 1993 Chrysler sebring need?
What it says in the manual
What transmission fluid do you need for a 1996 Chrysler Sebring?
Mopar ATF +4
