An important safety precaution you should take before starting any electrical servicing job is to make sure that the circuit is grounded, and not grounding through your body.
If you stand on a cement floor while wearing leather soled shoes, and touch a water or gas pipe, a TV antenna, or any grounded object, or a "hot" wire, you can get a severe shock. A way to prevent yourself from being grounded is to wear rubber soled or composition soled shoes. The only way to be completely safe while working on a small appliance is to unplug it.
The crucial one -- knowing what you're doing. If you must ask, you don't.
But to prevent your involuntary suicide -- make sure your power is disconnected & use a voltage tester before grabbing wires. Also don't ground yourself, by touching Plumbing pipes for example.
WARNING: 220 volts is potentially fatal even to a healthy adult
This is a really open ended question. There are so many factors and practices associated with safety all that can be done is to provide references. In the United States please reference:
OSHA 1910 Subpart S
OSHA 1926 (construction work)
NFPA 70E (arc flash)
Electrical Safety Handbook (can be ordered from Amazon)
Personal protective equipment to be worn by an electrician will depend on the kind of work being done.
It may be normal work clothes. It may be simply insulated shoes or gloves. In some cases it could include arc flash rated fire resistant pants and shirt, or even a complete covering suite including hood and face shield, hard hat and hearing protection.
donot use electricity near water.
hiknujhnmio
The set of rules to follow to avoid accidents and injuries
Science Safety Rules, such as WHMIS (Workplace Hazardous Materials Information System) are important because, as the name suggests, they help keep you safe by making you take necessary precautions to avoid injury when conducting an experiment.
pictures of safety rules for children
Safety rules should be followed because certain rules are put into place to ensure organization, order and safety
pagal rules
keep to the rules,health&safety
there are 4 safety rules in laboratory there are 1.work safety practices 2.vertical autoclaves 3.chemical identification 4.green lab equipment
The set of rules to follow to avoid accidents and injuries
Good Laboratory Practices Standards: http://www.epa.gov/compliance/monitoring/programs/fifra/glp.html
To avoid getting injured. And if it's at work, you might get fired for not following rules, as the company don't want to pay for anuy damages you might cause for not following safety rules.
So everyone will have a chance of knowing what is needed to be safe.
What are the safety rules for pencil
Regardless of what you are building, standard construction safety rules will apply. You may contact OSHA to make sure that you know all of the rules and guidelines for any construction site. If you are compliant with them and you know all the rules and guidelines, you will be able to provide all the safety needed for your workers and avoid expensive OSHA penalties.
The rules and practices are based on Quran and prophet Muhammad (PBUH) sunnah (sayings and practices). Refer to question below.
Consider using the rules set out in the electrical code book. These are safety regulations, to be followed to do a job correctly and safely.
It is important to follow health and safety rules because that helps avoid injury, illness or death to you and your co-workers, and prevents property damage and loss that could hurt the company, and thus your job prospects.
Science Safety Rules, such as WHMIS (Workplace Hazardous Materials Information System) are important because, as the name suggests, they help keep you safe by making you take necessary precautions to avoid injury when conducting an experiment.