Cable with military-style class L connectors
2
2
An electrical distribution centre is used to distribute circuits through out the building that it supplies. An electrical panel in your home is classified as an electrical distribution panel. The electrical distribution panels come in varying sizes and voltage ratings depending on what the building requirements are. Amperages for different loads are supplied through breakers that are part of the distribution panel.
150 feet
In the CEC there is no definition for a load center. In layman terms a load center is; A distribution panel that does not have a disconnect breaker in the same enclosure. A distribution panel that does have a disconnect breaker within the enclosure is called a combination panel.
The connection blades and how they connect into the distribution panel's bus.
It is a reference to let an electrician know what voltages can be applied to the distribution panel. Along with this data will be the amperage that the distribution panel can legally handle. It lets the electrician know that the distribution is to be used in North America and to be used on a single phase, split phase secondary supply.
They can come in the top or bottom whichever is the best. <<>> If the distribution panel is a load center (no Main disconnect) the above statement is true. If the distribution panel is a combination panel (main disconnect at top of panel) then the load feeds can only be brought in the two sides and the bottom. A combination panel has an internal barrier to separate the main disconnect from the load side of the distribution board.
The length of the cable is determined by the distance from the center of the distribution panel to the center of the load.
if your standing at the fender looking at the Distribution center box, it is the first one on your right closest to you if your standing at the fender looking at the Distribution center box, it is the first one on your right closest to you
The service distribution needs to have a disconnect from the utility supply. Most homes use a combination distribution panel. If the home owner wants to have a load center installed then there has to be a fused disconnect ahead of the panel. The less costly of the two options is the combination panel. Labour costs drive the load center, main service switch option much higher because there are more materials to assemble.
Without knowing what the size of the distribution panel amperage rating is, an answer can not be given as to if 6.5 more kilowatts can be connected.