You can find pretty much all welding defects in Mig welding. There are some that are morelikely to appear than others but that is depending on the gas and power range that is being applied.
The defects are: porosity, incomplete penetration (mostly in case of short circuit transfer) undercut, excessive concavity/convexity (incorrect amperage/voltage ratio), cracks (cold and hot) incomplete fusion (wrong torch angles), cold lap.
Oxygen and acetylene for flame welding. Argon for Tig welding CO2 for MIG welding steels Argon for MIG welding aluminum TRI-mix for robotic mig of steels. And helium is added for some overhead welding.
metal inert gas (MIG) welding
Mig
One type of welding is tube welding. Another type if mig welding.
Flux core is a type of MIG welding.... please kind of know what your talking about before you ask a question.... Gas assisted solid mig wire welding is neater and cleaner. There are two types of flux core mig welding that you are talking about. 1. Gasless flux core mig wire 2. Shielded flux cored welding wire, uses a shielding gas as well. Most likely you are talking about the gasless mig wire. look here for more info: www.learn-how-to-weld.com/gasless-mig-wire.html
When MIG welding STEEL a mixture of Argon -- CO2 is used. 75% - 25%
metal inert gas (MIG) welding
DCEP for standard Mig. DCEN for Flux Core
MIG stands for metal inert gas. It is a non-standard term for gas metal arc welding (GMAW) and flux cored arc welding (FCAW) according to the American Welding Society (AWS). It is simply Metal Inert Gas.
A tubular or wire cored electrode is used for both MIG and MAG welding. These can be purchased online at places like AGA.com.
Gas Metal Arc Welding Most folks call it MIG
It depends on what you are welding. If you are doing welding on mild steel go with MIG welding; if it is aluminum or stainless steel then use TIG welding. TIG welding gives a nice looking finish. If you just want to get a decent look, then MIG is preferable and easy.