answersLogoWhite

0


Best Answer

Depending on the type,style, single garage door or double and getting what you want are many of the variables involved. The area you live in also affects sq. ft. cost. As a contractor in North Florida I can say you should expect to pay a min. of $40 per sq.ft. using a contractor(licensed) and you could possibly save 15-20% if you build it all yourself. There are many websites that offer an free estimate "guide" based on info you put into the slots. Do a search for estimated cost of building a garage, and you should get a few good hits. Theses sites offer a true real look at what your cost will be. Too many posts will tell you that the cost should be $25 per sq.ft and these individuals are giving very bad advice but it is based on what they or a friend"just did" and you have no way of knowing what was built. I hope this helps you a little. I just priced a garage off of a complete materials list in building plans in NC. For a 2 car (24x28), 2 dormers, 12/12 pitch roof, and side door. I based it on contracting out grading and foundation and DIY everything else. I came to $28 a sq ft with an allowance for about $900 in extra material I may need.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the square foot cost to build a garage?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the average cost per square foot to build a garage in new york state?

The average cost to build a garage in New York State varies based on the size of the garage. A 1 car garage costs $40 per square feet to build. A 2 car garage costs $85 per square feet to build.


What is the Cost per square foot to build a house in Fresno CA?

The average cost per square foot to build a house in Fresno, California, is about $140. This means a 890 square foot home would cost about $124,600 to build.


What is the average cost per square foot to build a house in Milledgeville GA?

The average cost per square foot to build a home in Milledgeville, GA is about $68. This means the cost to build a 5,000 square foot home would be about $340,000.


Cost per square foot to build a new home in Madison Wisconsin?

The cost per square foot to build a new home in Madison, Wisconsin, runs about $110. This means that a 2500 square foot home would cost about $275,000 to build.


What is the average cost per square foot for warehouse storage in Michigan?

The average cost per square foot for building a house in Wisconsin is about $110. This means a 1000 square foot house would cost about $110,000 to build.


What is the average cost per square foot to build a house in Cecil County Maryland?

The average cost per square foot to build a house in Cecil County, Maryland is about $137. This means a 1,000 square foot home would cost about $137,000 to build.


What is the average cost per square foot to build a home in san Diego?

What will it cost to build a two story house 58' x 48' with a 28 x 30 garage in South Dakota if I own the ground


What does it cost to build a house in indiana?

The average cost per square foot to build a home in Indiana is about $132 per square foot. This means a 2500 square foot home would cost around $330,000 to build.


What is the cost per square foot to build in Westchester county ny?

The cost per square foot to build a home in Westchester County, NY, is between $110 and $160. This means a 2500 square foot home could cost anywhere between $257,000 and $400,000 to build.


What is the average residential cost per square foot for building a home in Manchester VT?

In Manchester, VT, the average residential cost per square foot to build a home is about $89.70. This means that a 5,000 square foot home will cost about $448,500 to build.


What is the average cost per square foot to build a house in VA.?

$100.00 per square foot


Average cost per square foot to build a house in daviess co KY?

average cost per per square foot to build a house in durango co