answersLogoWhite

0


Best Answer

The ideal salt level is between 2700-3400 ppm (parts per million) with 3200 ppm being optimal. Before adding salt to your pool, test the water to check your salt level.

User Avatar

Mr Answers

Lvl 11
4y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

15y ago

That depends on the saltwater chlorination system you are using check with the manufacturer.

This answer is:
User Avatar

User Avatar

Wiki User

16y ago

2700-- 3300 ppm

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

27-34

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What should be the salt level be on a salt system pool?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do salt levels in salt pool go up?

If you are adding salt to a salt water pool with a salt water chlorination system and the TDS level does not go up then the problem probably lies with the chlorination system not working (the electrolysis unit or power supply). Adding salt directly to the pool will increase the TDS (Total Dissolved Salts) concentration of the water.


What should be done if your Pool Service treats your salt water pool as a Chlorinated pool and adds chlorine shock to your salt water pool by mistake?

Get over it. He made a mistake. You may point it out to him nicely of course. BTW it does not hurt or he may have felt that the pool needed it. BTW there is a mode in the salt system to shock the pool thru the system. precipitation


Why does my Intex salt water pool system keep turning the water brown - goes into the system clear but water exits the system - and into pool - brownish?

Are you using iodized salt or pool salt? I've read that the iodine in the iodized salt will leave yellow staining in the pool.


What should the readings be for alkalinity and stabilizer for a salt water swimming pool?

The same as a non-salt system pool. Disregard answer above. The only reading that will remain constant, in the above situation, is the alkalinity =80 - 120 ppm; pH = 7.4 - 7.6 For a salt system pool your conditioner/stabilizer should be slightly higher than a namually fed pool. You should achieve readings of 75 - 85 ppm.


How do you check the salt level in a pool?

You can buy salt test stripes at any local pool store or have them check it for you.


How do you size a pool saltwater system?

Salt systems are rated for the maximum size pool in gallons that they can maintain. This sizing only applies to a pool that is barely used and does not get much debris or sunlight. In all other pools you should go 1.5 times bigger on the salt system than the size of the pool itself. For example a 10,000 gallon pool will require a 15,000 gallon salt system. If the pool is used a lot or it gets plenty of sunlight and debris, or all three you should go twice as big.


How much salt goes into a swimming pool?

It depends how many gallons your pool is. Once you buy your chlorinating system, the install manual will tell you how much salt to add based on how many gallons in the pool. I have an Autopilot Digital and it tells me when it needs salt. I still check it with test strips to be safe.


Will switching from chlorine chemical system to a salt water system ruin pool?

No A salt water pool is in fact also chlorine pool, the difference being that with a salt water pool a salt water chlorinator converts the salt that is in the water into chlorine gas which is then dissolved into the water while the filter is running. the conversion wont have any adverse effects on the pool.


Where can you get the salt from for your pool salt chlorinator system?

Most pool shops carry it and some department stores and hardwares


Can one enter pool right after pouring the salt?

Yes you can. The question is not about the salt is about whether your pool is sanitary or not and that has to do with your chlorine level mostly.


Does handling large amounts of pool Salt harm the skin?

No, the reason you have to have a certain amount of salt in a pool, is for disinfecting and cleaning reasons.I own a salt water pool and the salt level is not always correct, but I notice no difference. We also have pool guys and they handle the salt with no gloves.


What is better and anodizer or salt chlorinator in a pool?

not salt water, but its better for your health! Salt is not a pool cleaner, it is usually there to make chlorine via a "salt system"