0
1-8-4-3-6-5-7-2 clockwise on dist. cap.
drivers side head front to rear cylinders are 1-3-5-7
The other head front to rear is 2-4-6-8
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Firing sequence for 383 stroker?
firing order 383 stroker Chevyif it's a Chevy 383 stroker then the firing order i 1-8-4-3-6-5-7-2
What is the firing order for a Chevy small block 383?
The 383 Stroker firing order is 1-8-4-3-6-5-7-2
What is the firing order for a 1970 Plymouth roadrunner?
what is the firing order for a 1970 Plymouth roadrunner with a 383 engine
What is the firing order of a 383?
If its a Chevy its the same as the other small blocks. A three eighty three is a three fifty with a four hundred crankbasically. The crank doesn't change the firing order. The firing order is 1-8-4-3-6-5-7-2.
Which is faster Chevy 383 or Chevy 400 small block?
It depends on the transmission and any modifications to the engine.
What is the best engine a 355 Chevy or a 383 Chevy?
355 is a non stroked just bored 4.030 over 383 on the other hand put a 3.75 stroker crank and bored honed so i would pick 383 . 355 is bored not stroked clearence for stroker crankbest engine would say is 383
How do you time a 383 stroker Chevy with a 4-7 swap cam?
exactly the same as you would time a sbc...the cam swap doesn't change the way you time the motor...make sure that the plugs wires are ran to the right cylinder... standard firing order 18436572..... 4-7 swap firing order 18736542
Which is better a 350 engine or a 383 engine?
I would depend on if you are asking a Chevy man or a Mopar man. Personally I like the Chevy 350. If you are referring to a Chevy 383 made from a 350 block with a 400 crank, it would always make more torque than a 350. So if torque is what you're after, "there's no replacement for displacement".
Which small block Chevy engine has the most hp potential?
400 block, with a 350 crankshaft. 383 cid.
What is the firing order for a 1967 Newport with a 383 motor?
1-8-4-3-6-5-7-2
Did the 383 come stock in any Chevy?
NO, the 383 is called a stroker engine. It is a 350 with a 400 crankshaft that is machined, to make it work in a 350 block. There are other factors and modifications to be made when building a stroker. The only 383 that came from the factory is in Chrysler vehicles.
Is a 383 engine a dodge engine?
Yes and no. Dodge did make a V8 engine that displaced 383 cubic inches from the factory. However, a Chevy 350 can be modified to displace 383 cubic inches if you bore the cylinders .030" over and replace the entire rotating assembly (pistons, connecting rods, and crankshaft) with a shorter compression height set of .030" overbore pistons, either factory length or longer connecting rods, and a crankshaft with a 3.75" stroke. This Chevy 383 is quite popular among hot rodders and drag racers.
