Breakaway torque is the torque required to start the initial movement, in the loosening direction, of a bolt, screw, or nut from its (non−loaded) at rest position with the locking element engaged.
Tightening torque is the torque necessary to move the bolt, screw, or nut along its threaded length in the tightening direction.
The torque required to start a machine
Torque
The torque would be the same, as torque measures the rotational force between the two objects, not necessarily the output at either end.
rotational energy
Simply put 'torque' is a measure of rotational force.
Not exactly,torque is the force that affects rotational motion; the greater the torque, the greater the change in rotational motion. It is always specified with regard to the axis of rotation.
One difference between dynamic torque and static torque is the level of difficulty to measure. Static torque is each to measure, while dynamic torque is not. This is because it requires a transfer of an electric or magnetic effect.
I think you are looking for torque.
The rotational analog of force in linear motion is "Torque".
Torque is a movement force. Moment is a static force.Torque is often presented as Nm/revolution and moment is typically presented as Nm.The words "torque" and "moment" (of force) mean the same.However, "torque" tends to be used when there is an axle or pivot to be turned around, while "moment" tends to be used in essentially non-rotational situations, such as analysis of forces on a beam.
Torque
There is none