Air core inductor: This inductor is used when less value of inductance has to be generated. A carboard or plastic former(core) is wound with the wire(the coil) and the maximum magnetic flux is lost and thus less flux is linked with the coil. hence the inductance is less.
Iron core inductor: This inductor is used when greater value of inductance has to be generated. A iron material is wound with the wire(the coil) and iron being a magnetic material gets magnetized itself hence more flux is generated and it is not lost.
The more Ferromagnetic material you use as a former(core), the greater is the flux linked with coil.
The advantages of an air gap Transformer
The disadvantages of the air gap are -
The schematic symbol for an iron-core transformer is a pair of parallel inductors separated by a pair of solid lines; for an air-core transformer, the parallel lines are omitted. Air-core Transformers are used for high-frequency applications such as radio circuits.
theya re 2 different types of power
difference between dual core and core i3
what are the major advantages of dry type transformers over oil type transformers
Primary and secondary winding and mutual induction principle.
The major difference is that the core, usually having three limbs if it is a 'core-type' core (or five, for a 'shell-type' core), must accommodate six windings: three primary phase windings and three secondary phase windings. Some three-phase transformers may have additional windings ('tertiary windings', for example) for various other purposes.
If the transformer had a solid core it would build up eddy currents within the core possibly making the core itself rise in voltage. The laminations break up these eddy current circuits and prevent this.
The difference between the core and the lithosphere is the core is on the top of the lithosphere and the lithosphere is on the bottom of the core
The difference is between how the windings relate to magnetic material around which they are wound. If this magnetic material surrounds the windings then the device is said to be a shell type transformer. If the windings cover the exterior of the magnetic material then the transformer is said to be of the core type. Please see the link.
What is the difference between dual core and atom processor?Read more: What_is_the_difference_between_dual_core_and_atom_processor
What is the basic difference between Duel Core Processer and Core 2 Deu Processer?
difference between dual core and core i3
core culture
the inner core is a liquid where as the crust is a solid :)
Actually it depends on the air gap between the core and the windings of the transformer. This is the reason why stepped core is used in medium and large transformers as it decreases the air gap between the windings and the core of the transformer.
The inner core Is solid and the outer core in liquid
The inner core Is solid and the outer core in liquid
There is no difference. Both represent the same.
Transformers - 1984 The Core 2-24 is rated/received certificates of: Australia:G