A: impressed voltage is a mechanical connection involved induced has no mechanical connection except for proximity
first of all the voltage doesn't change what changes is the current direction the way they do it is by using magnet . electrons tend to escape from the magnetic field . you can find on you tube how a motor works for better idea.
Difference in potential between two points. Like the voltage of an energizer AA battery is 1.5 volts BETWEEN its terminals. If you place two AA batteries in a flashlight, the voltage of the series combination of AA batteries from one tip to the other is now 3 volts.
Lightning is caused by a voltage difference between the clouds and Earth, or between clouds.
Faraday's Law.
No, a voltage will be generated, not a current. Current will only flow if the induced voltage is connected to a load.
An induced electromotive force (emf) is an induced voltage. Voltage (emf) causes current flow, and this induced voltage will cause a current that is called the induced current.We might also add that the induced current will cause a magnetic field to expand about the current path, and this field will "sweep" the conductor. The sweeping of the conductor by that expanding magnetic field will set up an emf that will oppose the emf that was creating it.CommentTechnically, there is no such thing as an 'induced current'. It is voltage that is induced. Any current flows as a result of that induced voltage being applied to a load. But that current is certainly NOT induced!
Same frequency as that of primary coil
Induced voltage generates in rod.Voltage difference evolve between two ends.
Just as a current flowing through a wire will produce a magnetic field, so a wire moving through a magnetic field will have a current flowing through it. This is called electromagnetic induction and the current in the wire is called induced current. A stationary wire in the presence of a changing magnetic field also has an induced current. A changing magnetic field can be produced either by moving a magnet near to the stationary wire or by using alternating current. A stationary wire in a magnetic field which is not changing will have no current induced in it. You will sometimes see this effect described as induced voltage. Strictly speaking, you will only get an induced current in the wire if it is part of a complete circuit. A wire which is unconnected at both ends will have a difference in voltage between the ends (a potential difference) but current can only flow when the wire is in a circuit. Induced current is used in electricity generation and transformers.Another AnswerThere is no such thing as an 'induced current', only an 'induced voltage'. Current will flow only if the conductor into which the voltage is induced forms part of a closed circuit.
no difference...
The induced voltage acts to oppose any change in current that is causing it. So, if the current is increasing, then the induced voltage will act in the opposite direction to the supply voltage; if the current is decreasing, then the induced voltage will act in the same direction as the supply voltage.
There is no such thing as an 'induced current'. What is 'induced' is a voltage. The direction of the induced voltage is determined by the direction of the changing current that induces that voltage, because the induced voltage will always act to oppose that change in current. So, if the current is increasing, then the direction of the induced voltage will act to opposethe increase in current. If the current is decreasing, then the direction of the induced voltage will act to sustainthat current.
You can vary the induced voltage by varing the speed of the rotor.
There is no such thing as an 'induced current'. What is 'induced' is a voltage. If the conductor into which that voltage is induced forms a complete circuit, then a current will result. But it's the voltage that's induced, NOT the current! The direction of the induced voltage is explained by Lenz's Law which, in simple terms, tells us that the direction of the inducted voltage is always such that it will oppose the change in current that causes it. So the induced voltage will oppose any increase in current, but will act in the same direction as a reduction in current.
Induced voltage is alsocalled ghost or phantom voltage as if you apply a load it vanishes. induced voltage will be potential/electrical pressure. Amperage is the actual flow of current being used, Watts being its calibration of total power used.
According to Faraday's law, a voltage is induced in a conductor by a changing magnetic field.
Voltage is impressed across a circuit. Current flows through a circuit.