Acrylic or epoxy based paint for cement surfaces is called cement paint.Cement that includes acrylic or epoxy to coat surfaces is called cement based paint.
Yes you can. Substitute 20% of the water for the cement mix with latex paint (Water based paint) and mix slow and thorough. Don't over used too much paint it will damage the integrity of the concrete.
you can't paint silicon... however you can paint contact cement... clean silicone , paint with contact cement carefully ,paint contact cement with your paint, covering all contact cement
cement paint.
painting of oil is called oil paint and painting of vinyl is called vinyl paint
There is no such thing as gasoline paint.
Yes you can. Substitute 20% of the water for the cement mix with latex paint (Water based paint) and mix slow and thorough. Don't over used too much paint it will damage the integrity of the concrete.
It is a white cement based paint. Sometimes a laytex pased paint is used but this is infrequent.
you can't paint silicon... however you can paint contact cement... clean silicone , paint with contact cement carefully ,paint contact cement with your paint, covering all contact cement
The solution in which the pigment is suspended. i.e. the pigment is suspended in a water-based solution in latex paint, but in an oil-based solution for alkyd (oil) paints.
Quite simply the materials used to paint the picture. Pigments used for painting may be, among other things, water or oil based. Generally, but not always, oil based paintings endure longer.
Alkyd paint has a resin in it to help the oil in the paint dry faster, oil based paint in my opinion has a more vibrant colors, both in depth an brightness, waterbased seems to be toned down some-what. Wood paint can be either water based or oil based and even water soluble oil based. Oil based alkyd paint lately are used for things or areas that might receive abuse, and because of the slower drying time the oil based alkyd paint will show less brush marks then water based paint.
I don't see why not, many Fabric Paints are Acrylic, which means the're water based, I think there is an oil based Fabric Paint, which ever you deside to use, when and/or if you deside to put a finish coat on your project, make sure you use a water based finish with a water based fabric paint and an oil based finish with a oil based fabric paint. The only difference between Fabric Paint and Regular Paint is the fabric paint has an ingredient in it to make it washable.
cement paint.
how can I tell the difference between acrylic and oil paint on my wall?
Yes you can.
put black paint in it
Lime Based Skim coat (LSC) is made with lime in various formulation and there is no standard formulation. The same consists of mainly lime, oil and several other igredients which changes from place to place. Cement based Skim coat on the other hand is factory made and contains Cement as Binder along with Filler and Additive to support various properties. The basic difference between Lime Based Skim Coat and Cement Based are that the Lime Based Skim Coat are not water resistant and cannot be applied externally, whereas cement based Skim Coat(CSC) can be applied interiors as well as exteriors. They are water resistant. The adhesion strength of the CSC is much higher than LSC. CSC being cement based becomes an integral part of the base plaster hence the durability is very high. LSC on the other hand cannot tolerate any moisture and gets peeled off in contact with the moisture. The Skim Coats are generally done as a base coat for paints and the CSC provide a firm base for the paints. The CSC can be made water resistant which results in lower consumption of Paint by around 20%. The initial cost of application of CSC is slightly higher than the LSC which is compensated by the lesser paint consumption and becomes lower as no primer is required after application of the CSC. For any further information on the properties of the CSC if required I can be contacted in the following email ID: sumonc@adityabirla.com