Labor: $103 - $131
Parts: $20 - $52
As the jeep is very old so it might cost INR 40000 - 50000 and for ford it must be 10000 INR less
The intake valve is bigger.
my jeep Cherokee 1998 4.0 is a straight 6
I replace the heads with first starting by draining the coolant then removing the exhaust as neccasary then the intake manifold and distributor then the valve rocker arms and pushrods then unbolting the heads.
A 1998 Jeep Cherokee does not have a mass airflow sensor. It uses a manifold pressure sensor, MAP, which is on the rear of the intake manifold.
The PCV valve on a 1998 Toyota Corolla is located on top of the engine, on the passenger side. It connects the intake manifold with the valve cover.
On a 1998 Ford Explorer, the EGR valve is located on the intake manifold. It is behind the throttle body.
how to install replace air intake hose toyota camry 1998
It's on the back of the intake plenum.
The PCV valve will normally be located on the valve cover of most engine's. You will see a large hose connected to the valve inserted in a rubber gromet. This will be running from the valve cover to the intake box or intake manifold.
The PCV valve for a 1998 Monte Carlo should plug into the valve cover. Twist and pull it to remove and replace it.
# The PCV valve is located in the valve cover # Detach the hose from the valve then unscrew the valve from the valve cover