I can calculate how much water it will take to fill the pool but not the cost. The cost has to be determined by how much you pay for water where you live. The volume of the 24ft round pool x 5ft deep pool (assuming the dimensions given are inside dimensions) is 2,261.952 cu ft and will hold 16,921.662 gallons of water.
It depends greatly on the size pool and shape, and of course if you build it yourself or not. I will answer this question based on a 16x32 rectangle pool.
If you were to pay your local retailer for buying, and building the pool, you would be looking at somewhere in between 22 and 29k for your basic setup. Pool, liner, steps, pump filter, and no options. This is all based on a minimal deck around the pool, and basic pebble finish concrete. No stamped, or brick edging, automation systems or lights, heaters, etc.
If you are a bit handy, and want to do the job yourself, you can get your basic kit online for around 5-6k. You will also incur your building expenses, and based on if you subcontract out your excavation, you will be looking at about 13-18k for the same setup. Online pool purchasing is becoming more and more popular these days. I can recommend one as well. Royal Swimming Pools .com is a do it yourself based site, and i have known a few people to purchase from this company.
Of course you can still buy the pool online, and then subcontract out the work if you wish.(No tax when you do this) You will still be taking on a little bit of responsibility, sort of acting as the general contractor, subbing out the major parts individualy. You can expect to pay 8-10k for your installation start to finish, on top of the pool cost of course. The more options you add on, the higher your pool cost is, normally doesnt raise up pool installation that much.
A little background on myself: I have been building pools on and off for about 15 years.
Need to know the dimensions of the pool to tell you how much water it needs.
That really depends on where you live. Here in Florida, they run about 18,000- 23,000 dollars, but the liners do not last very long here due to the intense sun.
about 1800-2300 dollars
Yes it wil just It should be alright the pressure of the water in the pool will push the ground water out. how much water underneath may influence the way the vinyl settles however.
Depends on the patch kit used. Most swimming pool vinyl patch kits will cure underwater because draining of a vinyl-lined swimming pool is NEVER reccommended!
You can't, I have never heard of any one converting any type of pool. The pool has to be taken out and then you can rebuild a new pool or fill in and put new pool in a new spot cost wise it is not feasable.
It's free when u dig a hole and fill it with water.
The average vinyl lined ingound pool is 18' x 36'. The cost of this pool averages $25,000 in the Southern US.
An inground pool is typically lined with either gunite (concrete), fiberglass, or vinyl. Gunite and fiberglass are roughly the same cost, whereas vinyl is considerably cheaper. With the lower price comes less durability, as vinyl lining has to be replaced every 8-10 years or so, whereas the other two can last for decades. Vinyl is also much easier to puncture or otherwise damage. That said, many people still prefer vinyl inground pools due to the lower cost.
Be more specific please- what about removing it? cost? difficulty? What type of pool is it? fiberglass? vinyl liner? concrete?
try bleach. but be sure to clean it our good before you fill it back up.
In the Chicagoland area a small, basic inground pool will cost between $20,000 and $50,000. Some of the larger, deeper and more high-end inground pools can cost as much as $100,000. One of the most difficult aspects of planning for an inground pool is estimating the total cost. There are several variables that affect the overall cost of building and maintaining an inground pool, including the size of the pool and the material will comprise it.
Well first of all there is no such thing as a fiberglass pool. You can have fiberglass walls instead of steel but your pool is still vinyl because you need a liner. These are the usual combinations of inground pools. Sand floor, steel walls, vinyl liner Sand floor, fiberglass walls, vinyl liner Vermiculite floor, steel walls, vinyl liner Vermiculite floor, fiberglass walls, vinyl liner Concrete floor, steel walls, vinyl liner Concrete floor, fiberglass walls, vinyl liner Concrete floor, concrete walls, no liner Concrete pools have to be painted with epoxy paint or if you want tile installed then usually you plaster over the concrete. Now a days 3 and 4 are the most common inground installs. 1 and 2 are usually pools that are 30 + years old although you can still have them done that way. In South Alabama the cost of a 20 *40 vinyl pool will cost around 18 to 22 thousand
How much does a stinless swimming pool cost