Around 72 %
Inefficiencies in the compressor of a gas turbine cycle increase the back-work ratio and decrease the thermal efficiency of the gas turbine cycle, since they increase the compressor work.
In an open cycle gas turbine, the gases that are produced by combustion go directly into the atmosphere, though the heat produced can sometimes be reclaimed. In a closed cycle gas turbine, the gases produced are reused and are not emitted into the atmosphere.
In an open cycle gas turbine, the gases that are produced by combustion go directly into the atmosphere, though the heat produced can sometimes be reclaimed. In a closed cycle gas turbine, the gases produced are reused and are not emitted into the atmosphere.
Depends on what type of gas, plant size and cycle and carriage.
gas turbine are used for expansion of high pressure gas,which rotates the rotor coupled with generator and hence electricity is finally produced.Gas turbine operate on brayton cycle.
You can use the bio gas to fuel either a steam cycle generator or a gas turbine.
by increasing the turbine inlet gas temperature
Gas turbine engines and airbreathing jet engines use the Brayton Cycle.
Using waste energy in a gas fired electricity generation plant to run a steam turbine
A modern combined cycle gas turbine/ steam turbine power plant can reach almost 60% efficiency.
A simple-cycle gas turbine used for power generation has a thermal efficiency of about 34 percent. Since 1 kwh is theoretically equivalent to 3,415 Btu, the simple-cycle gas turbine has a fuel connsumption of: 3,415 / 0.34 = about 10,000 Btu/kwh. Given the heating value (i.e, heat of combustion) of a fuel, we can easily calculate the simple-cycle gas turbine fuel usage. For example, natural gas has a net heating value of about 21,500 Btu/pound. Thus, the natural gas consumption in a simple-cycle gas turbine would be: 10,000 / 21,500 = 0.47 pounds/kwh = 0.21 kg/kwh. As another example, a typical diesel oil has a net heating value of 130,000 Btu/gallon. Thus, the diesel oil consumption in a simple-cycle gas turbine would be: 10,000 / 130,000 = 0.077 gallon/kwh. (The gallon used just above is the U.S. gallon rather than the Imperial gallon) A combined-cycle gas turbine will have a higher thermal efficiency and, hence, lower fuel consumptions.
gas turbine generator