answersLogoWhite

0


Best Answer

noise filters are used in electronics and electric curcuts to reduce the the noise level which the electric switching generats sometimes the are single phase and there are three phase also the most used noise filters are ssr emc filters

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is noise filter?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Electrical Engineering

What are the applications of Butterworth filters?

especially it is very much useful in high quality AUDIO applications because of its flat response in both pass band and stop band where as chebyshev will be useful in signal monitoring applications where the phase is not important criterialow pass filters are used to filter noise from a circuit .noise is a high freequncy signal, when passed through a low pass filter most of the noise is removed and aclear sound is produced


What is EMI filter?

An in line device used in filtering ac votlage out of transient or (electrical noise) before allowing the electrical current to enter an electronic board of certain designs.


What are the different types of noise in communication systems?

There are a number of ways to classify noise. It can be subdivided according to type, source, effect, or relation to the receiver, depending on circumstances. In order to make the classification more compact, noise sources can be divided into two main groups: • Noise whose sources are external to the receiver (External Noise) and • Noise source created within the receiver itself (Internal Noise). types include: Shot noise; Johnson noise and Partition noise.In electrical terms, noise is defined as the unwanted form of energy which tends to interface with the proper reception and the reproduction of transmitted signals. Electronic Devices unwanted random addition to the signal are considered as Noise.Classification of Noise:There are several way to classify Noise, but conveniently Noise is classified as1) External Noise2) Internal NoiseExternal Noise:External noise is defined as the type of Noise which is general externally due to communicationsystem. External Noise are analysed qualitatively. Now, External Noise may be classified asa) Atmospheric Noise : Atmospheric Noise is also known as static noise which is the natural source of disturbance caused by lightning, discharge in thunderstorm and the natural disturbances occurring in the nature.b) Industrial Noise : Sources of Industrial noise are auto-mobiles, aircraft, ignition of electric motors and switching gear. The main cause of Industrial noise is High voltage wires. These noises is generally produced by the discharge present in the operations.c) Extraterrestrial Noise : Extraterrestrial Noise exist on the basis of their originating source. They are subdivided intoi) Solar Noiseii) Cosmic NoiseInternal Noise:Internal Noise are the type of Noise which are generated internally or within the Communication System or in the receiver. They may be treated qualitatively and can also be reduced or minimized by the proper designing of the system. Internal Noises are classified as1) Shot Noise : These Noise are generally arises in the active devices due to the random behaviour of Charge particles or carries. In case of electron tube, shot Noise is produces due to the random emission of electron form cathodes.2) Partition Noise : When a circuit is to divide in between two or more paths then the noise generated is known as Partition noise. The reason for the generation is random fluctuation in the division.3) Low- Frequency Noise : They are also known as FLICKER NOISE. These type of noise are generally observed at a frequency range below few kHz. Power spectral density of these noise increases with the decrease in frequency. That why the name is given Low- Frequency Noise.4) High- Frequency Noise : These noises are also known TRANSIT- TIME Noise. They are observed in the semi-conductor devices when the transit time of a charge carrier while crossing a junction is compared with the time period of that signal.5) Thermal Noise : Thermal Noise are random and often referred as White Noise or Johnson Noise. Thermal noise are generally observed in the resistor or the sensitive resistive components of a complex impedance due to the random and rapid movement of molecules or atoms or electrons.Get more details from http://blog.oureducation.in/types-of-noise/


How the room noise detector will work?

If you make a noise, a man wearing just boxers will attack you


State three advantages of over-sampling?

1) It greatly simplifies the design of the low pass filter which follows the DAC, which has to attenuate the aliasing noise but not the signal. Oversampling increases the gap between these, simplifying the low pass filter. 2) It allows for interpolation and thus much lower sine wave distortion figures. 3) It allows for superior DAC architectures such as delta-sigma and 1 bit DACs.

Related questions

What is a noise filter?

A noise filter could also be called a "baffle".


What makes a Humming noise in my speakers?

you need a noise filter! go to your local stereo shop and tell em you need a noise filter.


How do you filter out white noise?

Ee


What is that noise There is a noise coming from the basement when the air is on There is a new filter but the noise seems to be coming from that spot It's not a terrible noise just loudness?

As the filter was replaced recently it could be just a loose filter housing that is causing the unit to "rattle" when it is running. Rest your hand on different places near to the filter on the casing of the air conditioning unit to see if you can locate the cause of the new noise. If the noise can easily be stopped just by pressing on the filter housing - or somewhere else on the casing near to it - then the person who changed the filter needs to come back and ensure that the new filter is correctly seated in its housing and that all the screws are properly tight.


How do you install audio noise filter?

einbauen


Difference between broadband and narrowband noise?

Before sending your signal to the receiver,it should passed through the narrowband filter(whose band is narrow).the noise appearing at the output of the filter is narrowband noise..


Toyota Camry glove compartment filter replace now a loud noise when air is turned on high speeds?

The noise is from the airflow going over the new "Cabin Filter" unevenly. Pull the filter out, flip it over and re-insert it. This should fix the noise problem.


You clean the fish aquarium filter but it still making that lound noise?

What type of filter? Is it a vibration? It may be time for a new filter if the noise is too much, it's probably going to die soon anyway.


Clicking noise after changing air filter?

A clicking noise after changing an air filter on a car could indicate there is a problem. You should consult a car care professional.


What are the differences between optimum filter and match filter?

optimum filter is given by a matched filter,when channel noise is white."ankit j. iet"


Can bad fuel filter cause rattling noise in the engine?

No


Why to have a filter before and after a low noise amplifier?

To cut off unwanted frequencies, unwanted frequencies are called noise.