MOdulus
of elasticity for steel is 2*1011Newton per meter square
Most steels are 30,000,000 PSI. Some special steels like stainless or structural are slightly less.
The Elastic Modulus (aka Young's Modulus) for annealed 304 stainless steel is 193 GPa. More data is available at: http://www.azom.com/details.asp?ArticleID=965
Young Modulus is the slope of the stress-strain diagram in the linear elastic region. This is the most common use of modulus. As the material goes non-linear in the stress strain curve, thre slope will get increasingly lower. In this case one connects the end points of the stress strain diagram at the point of interest with a straight line. The slope of that straight line is the secant modulus.
what is the flexural modulus value od mild steel
Steel and stainless steel tend to weigh around the same, however, stainless steel can sometimes be a bit lighter.
Stainless Steel 316, a type of stainless steel
The Elastic Modulus (aka Young's Modulus) for annealed 304 stainless steel is 193 GPa. More data is available at: http://www.azom.com/details.asp?ArticleID=965
The Young modulus and storage modulus measure two different things and use different formulas. A storage modulus measures the stored energy in a vibrating elastic material. The Young modulus measures the stress to in still elastic, and it is an elastic modulus.
The tangent modulus of steel varies depending on if the steel has yielded.If the steel has not yielded, and is still elastic (stresses less than approx. 275 MPa (39885 Psi) the tangent modulus will be equal to the Young's Modulus, 205 GPa (39885367)If the steel has yielded, the tangent modulus will be related by the Ramsberg-Osgood Equation, but a reasonable value to use would be approx. 1.5 GPa (2175565 Psi)
The elastic modulus, also called Young's modulus, is identical to the tensile modulus. It relates stress to strain when loaded in tension.
The elastic modulus of shale is between 1-70 GPa
It is made of conichrome. Conichrome has a modulus of elasticity very similar to that of stainless steel.
it depends on modulus of elasticity / young's modulus,,,,,,,which is ratio of stress and strain under elastic limit
Young Modulus is the slope of the stress-strain diagram in the linear elastic region. This is the most common use of modulus. As the material goes non-linear in the stress strain curve, thre slope will get increasingly lower. In this case one connects the end points of the stress strain diagram at the point of interest with a straight line. The slope of that straight line is the secant modulus.
N0. The common belief is that if an object elongates easily the object is more elastic . But in Physics the object which gives more resistance to elongate is said to be more elastic . Such objects will have high Young's modulus . Steel is more elastic than copper . The Young's modulus for steel is 210 G Pa For copper it is 117 G Pa Elongation for steel is 35% and for copper it is 45% For rubber Young's modulus is 0.02 G Pa and elongation is 500 % During collision two clay balls will stick together. We call it inelastic collision . Two steel balls will rebound easily and the collision is elastic collision.
Every material has its elastic modulus, and the speed of sound is proportional to the square root of the elastic modulus of that material.
what is the flexural modulus value od mild steel
There is stainless steel and there is magnaized stainless steel but you can not make regular stainless steel magnetic