Load on an electrical system is the power being drawn from the system. All electrical devices like fridges, heaters and light bulbs have an associated power usage capacity measured in Watts(W). Thus, we have a 60W light bulb. When these devices are all connected to an electricity network their combined power usages is load on the system.
Load can also refer to usage of say a house or factory. Often this will vary over time depending on what devices are turned on inside.
The opposite of load is generation, also measured in Watts. A power plant's generation capacity is so great it is usually measured in Mega Watts (MW) or a million watts. The generation and the load on a system have to be balanced otherwise the system becomes unstable. This can lead to load shedding and blackouts.
It is the ratio of average load and Connected load. or Ratio of average load and Peak load. It indicates the utilization of the Plant. Higher the load factor better the utilization.
Lack of electricity is called load shedding.There are many causes of load shedding some are: 1.demandz of electricity supplier's. 2.govt irresponsibility they are not paid full payment to electricity suppliers SOLUTION: We have to make some plains and arrange meeting and make sure them that we paid your payment in installments.
Action to reduce the load on something, especially the interruption of an electricity supply to avoid excessive load on the generating plant.
Load Shedding is the action taken to reduce the load on something. It mainly refers to the electricity supply in order to avoid too much load on a generating plant.
electricity CURRENT FLOW INTO A LOAD. Without a load that is just voltage sitting there.
No one can possibly post "all" questions and answers about electricity. That would take books. But you can post a specific question and we can try to answer it.
A 'load' is a device that does work by using electricity. 'Load' can also refer to the amount of electricity used.
The term "load" when used in electrical terminology is a device that uses electricity.
The term "load" when used in electrical terminology is a device that uses electricity.
by the load of the car
Lack of electricity is called load shedding.There are many causes of load shedding some are: 1.demandz of electricity supplier's. 2.govt irresponsibility they are not paid full payment to electricity suppliers SOLUTION: We have to make some plains and arrange meeting and make sure them that we paid your payment in installments.
Action to reduce the load on something, especially the interruption of an electricity supply to avoid excessive load on the generating plant.
a circuit
The object that uses electricity in a circuit to make something happen is known as the load. Usually the load is rated in watts.
Load shedding encourages members of society to use electricity more efficiently. Also, it makes the society depend less on electricity as it is not always available.
Load Shedding is the action taken to reduce the load on something. It mainly refers to the electricity supply in order to avoid too much load on a generating plant.
always wait for a full load. it not only saves water but also electricity.
A load to drive and a supply of electricity.