A titration in which the mass of the titrant is measured instead of the volume. Then you can express moles of reagent/ kg of titrant as it's concentration. How convenient. They are more accurate and precise because on most analytical scales you can measure out four or more decimal places. Where as in pipettes and burets you can only measure two.
Titration is the process of determining the concentration of a substance of a given solution using a known reagent. So types of titrations are neutralization titrations, red-ox titrations, gravimetric titrations and colorimetric titrations. According to the reagents available, the best type of titration should be determined.
A gravimetric factor converts grams of a compound into grams of a single element. For example, we'll find the gravimetric factor of Cl in AgCl. Use the atomic mass of Ag(107.868) and the atomic mass of Cl(35.453) and add them together to get 143.3. Then divide 35.453 by 143.3 to get .2474. .2474 is the gravimetric factor of Cl in AgCl.
types of conductometric titration: acid base titration complexometric titration replacement titration redox titration precipitation titration
Direct titration, Indirect titration, back titration, replacement titration and so on
over titration is when too much titrant is added to the analyte in a titration procedure.
Titration is the process of determining the concentration of a substance of a given solution using a known reagent. So types of titrations are neutralization titrations, red-ox titrations, gravimetric titrations and colorimetric titrations. According to the reagents available, the best type of titration should be determined.
AnswerVolumetric analysis or titration is a common laboratory method of chemical analysis which can be used to determine the concentration of a known reactant; volumetry is a quantitative method of analysis.Qualitative analysis is used to separate and detect elements, functional groups, molecules etc. in a sample substance, without specifying concentration.
The gravimetric factor is related to the percentage of element (or ion) to be determined in the precipitate (as compound).
types of conductometric titration: acid base titration complexometric titration replacement titration redox titration precipitation titration
A gravimetric factor converts grams of a compound into grams of a single element. For example, we'll find the gravimetric factor of Cl in AgCl. Use the atomic mass of Ag(107.868) and the atomic mass of Cl(35.453) and add them together to get 143.3. Then divide 35.453 by 143.3 to get .2474. .2474 is the gravimetric factor of Cl in AgCl.
Direct titration, Indirect titration, back titration, replacement titration and so on
over titration is when too much titrant is added to the analyte in a titration procedure.
Titration is a method of chemical analysis; for example: - volumetry - potentiometric titration - amperometric titration - radiometric titration - Karl Fisher titration - spectrophotometric titaration - viscosimetric titration and other methods
There are various types of titration. It is dependent on the conditions used and the reactants and desired products. Some of them are acid-base titration, redox titration, colorimetric titration and thermometric titration.
gravimetric analysis is the study of weighing certain compounds, comparing, heating, precipitating, to give us the mass of a specific molecule as a result gravimetric analysis is the study of weighing certain compounds, comparing, heating, precipitating, to give us the mass of a specific molecule as a result
Solubility always has to be considered as a source of error in gravimetric analysis because what remains in solution, no matter how little, doesn't get measured (although, it can sometimes be determined indirectly). So, gravimetric results are always erroneously low due to this factor.
It depends on the titration.