A round head or "button head" rivet. Typically only used for solid rivets with such a head shape.
A pop rivet, of course.
snap
It's the song in This is My Jam when the battle against Summertime Lovin' Lovin in the summer 'Time' Ah Snap, Ah Snap, Come to our maceroni party then we'll take a nap
Snap Judgment - legal comedy show - was created on 1999-04-01.
You can use a bolt and lock nut, probably 1/4 inch.
because it is good
Girders in buldings and bridges
because it is good
A copper snap head rivet is a type of fastener used to join two or more materials together. It consists of a solid copper shaft with a rounded snap head on one end. The rivet is inserted into a pre-drilled hole and then the shaft is hammered or pressed to expand and secure the materials in place.
A rivet set is a tool used to seat the rivet while drawing the material to be joined together to eliminate any voids or spaces between the head of the rivet and the materials to be joined. Some rivet sets also have an indentation to assist in both initially deforming the rivet to "set it" and to assist in the final shaping, though in days of old the tool that was used for the final shape of a rivet was also sometimes referred to as a snap. But in another time a snap was what a round head rivet was called. This all, of course, was just to add a bit of generational confusion.
I assume the rivet you are asking about is a "tinners" rivet and not a more common "blind" rivet (commonly known as a "pop" rivet). If this the case the tool you want is called a "rivet set".
upset -------------------------------------------------------------------------------- Upsetting the rivet is to compress the rivet during the installation process. That can be done with a rivet gun to "hammer" the rivet against a bucking bar, or to use a rivet squeezer to compress the rivet.
a rivet gun is a gun
A DD rivet is recognised by 2 dashes on the head of the rivet
Depends on the type of rivet but most can be removed by drilling off the head with a larger size drill bit then pushing the rivet the rest of the way out. You will then need a rivet gun and appropiate size rivet to replace it.
The distance between rows of rivets from the center of the rivet to the other rivet in a pattern that is staggered.
Élise Rivet was born in 1890.