0
its a fuse in the center consel, check their
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What is circuit 1 failure on Jag 1989 XJ6 thanks?
I have a 1988 Jag XJ6 that presented a "Circuit 1 Failure" on the dashboard. The cause of the problem was found to be a blown fuse in the passenger side fuse box. I replaced the fuse and the error message went away. "Circuit 1" refers to the fuse box located behind the right-front passenger side kick panel. "Circuit 2 failure" would indicate a problem in the fuse box located behind the driver's kick panel. Lastly, a "Circuit 3 failure" message would indicate a problem in the fuse box located in the center console. I hope that helps! - Keith
1988 Jaguar XJ6 circuit 3 failure Auxiliary Electric Fan. Changed the fuse and it kept blowing. Changed fuse again and the fan. Worked for one day and now the fuse has blown again. Any ideas.?
I have the same problem with the same year and model. Any ideas?
Jaguar 1988 Xj40 XJ6 circuit 2 failure?
After reading the question for: "circuit 1 failure" I decided to post my experience with the related "circuit 2 Failure" read on: On the dash there was a "circuit 2 failure message on my 1988 XJ40 or XJ6. After some poking around I noticed that the fuse for the Auxiliary Electric Fan on the radiator up front was blown. I replaced it, but after another drive was blown again. Some more poking around turned out that the Fan was in a rather sorry state of rust and barely turning thus creating a short and melting the fuse as soon as the relay will try to turn the circuit on. The fuse is not really labeled properly (and I don't really remember right now what position it was) However it is controlling the AC relay and all that grouping, Fan relay also. Checked the wires and fuse socket for signs of melting from somebody that might have put a higher amp fuse but found no problems. So I got a nice new looking Fan from the junkyard and the problem dissapeared and never I have seen it again... The car had many electrical problems to the point that the Electronic display was starting to look like a Christmas tree dispaly, flashing through various varnings and driving me nuts. With patience and using the info I have found on the web I have eliminated them all, except for a bulb failure warning that is really for real and legitimate (I am missing the light on the rear left bumper corner) Strangely enough the warning goes away sometimes for hours at a time... I don't own the original manual that came with the car, howver I think I have just about all documentation that is available for the XJ40 cars plus all the info on the web but nowhere there is any reference to any of the misterious "circuit n failure" warnings... All the other were somewhat clearer: (ABS) and so forth but these were a puzzle.Hope this helps somebody Cheers!!! Reply from Olen1009...I just bought an '89 XJ6 with a circuit 2 failure and, assuming the manuals are similar, the original manual wouldn't help you. There is nothing in it about fuses except the locations of the 3 fuse panels. Period!
What type of transmission fluid for 1997 Jaguar XJ6?
dexron 3
How do I get 89 from 267 divided by 3?
Because: 267/3 = 89
What times 3 is 89?
89 89 89 --- 240 27 ----- 267
Is the 1996 jaguar xj6 a series 1 2 or 3?
The XJ6 from 1995-1997 is referred to as the X300 and the 1998 onwards sometimes called the XJR is referred to as X308.
What is code 224 for 1994 ford ranger?
I believe that is ( PCM detected coil 1 , 2 , 3 , or 4 primary circuit failure - dual plug )
Power steering fluid for 1996 Jaguar XJ6?
atf dextron 3
What is 89 divide by 3?
29.6667
Is 3 divisible by 89?
No. It is not divisible by 3 because 89 is a prime number.
What is the prime factorization of 267?
3 x 89
