0
What is the effects of more than one voltage source in a network?
GeorgeUzunfb3123
Two voltage sources in series can either add up or cancel out depending on which way round they are orientated. If the two positive or the two negative terminals are connected together, the overall voltage is the subtraction of the two. If the positive terminal from one supply is connected to the negative terminal from another, the overall voltage is the sum of the two.
Wiki User
∙ 14y ago
Wiki User
∙ 9y agoThat depends on the network, where the voltage sources are in the network, type of voltage sources (DC, AC, signal, noise, etc.)
Add your answer:
Earn +20 pts
What is Impedance of ideal voltage source?
An ideal voltage source has no internal resistance, and a constant voltage output. In reality, all voltage sources (battery, generator, etc.) have some internal resistance, and their voltage may degrade or change over time.Ans 2: An ideal voltage source will have zero input impedance and the voltage can rise to infinity to supply the current.Read more: What_does_an_ideal_voltage_controled_voltage_sources_do
What is a voltage divider circuit?
The voltage divider circuit is a network of two or more components in series, often resistors, between a potential difference. The voltage between the components will be somewhere between the potential difference across the whole network and so divides the total voltage into one or more intermediate voltages.
Why do you short voltage source and open current source while using superposition theorem?
You short a voltage source when doing this analysis because you do not know how much current will flow through the voltage source - consider it an undefined value. For the same reason, you open a current source since you know how much current will be flowing through it. This is a simple explanation; I'm sure a more exhaustive, technical one could be made if this is not sufficient.
In a circuit is it possible that the sum of the voltage dissipated across each resistor larger than the voltage provided by the source How about the power?
No. This would mean more power is used than is provided - an impossibility. It is possible that you may not be accounting for a power source in your circuit, or have the actual source modelled incorrecty.
When you rotate the handle of the electric generator faster does it deliver more less or the same voltage?
The speed of a generator only effects the frequency. Most generators operate at 1800 RPM. The output voltage is controlled by varying the field excitation voltage.
What is Impedance of ideal voltage source?
An ideal voltage source has no internal resistance, and a constant voltage output. In reality, all voltage sources (battery, generator, etc.) have some internal resistance, and their voltage may degrade or change over time.Ans 2: An ideal voltage source will have zero input impedance and the voltage can rise to infinity to supply the current.Read more: What_does_an_ideal_voltage_controled_voltage_sources_do
What is Difference Between Current Source and Voltage Source?
A current source varies the output voltage to maintain the desired current. A voltage source has a constant output regardless of the current draw (up to the capacity of the supply, of course).
What happens to the voltage across the voltage source as more light bulbs are added in a series circuit?
Nothing.
Can you use more than one source of voltage in a circuit?
Yes, you can use more than one source of voltage in a circuit. You can also use more than one source of current in a circuit. In fact, complex circuit analysis can utilize Norton and Thevanin equivalents to convert part of the circuit from current source to voltage source and vice versa, allowing you to eventually understand the complete circuit.
What is the difference between voltage forward voltage and voltage drop?
Voltage is the potential difference between the source & any point in the circuit. The forward voltage is the voltage drop across the diode if the voltage at the anode is more positive than the voltage at the cathode (if you connect + to the anode). Voltage drop means, amount of voltage by which voltage across load resistor is less then the source voltage.
What is a voltage divider circuit?
The voltage divider circuit is a network of two or more components in series, often resistors, between a potential difference. The voltage between the components will be somewhere between the potential difference across the whole network and so divides the total voltage into one or more intermediate voltages.
Does voltage add in a series circuit?
The voltage between the ends of the circuit doesn't change ... that's where the power source is connected. But when you add more items in a series circuit, the voltage across each item changes. The individual voltages across each item in the series circuit always add up to the voltage of the power source. So in general, if you add more items, the voltage across each of the original ones must drop somewhat.
What is the difference between ideal and practical voltage source?
An ideal voltage source is a theoretical concept used in electrical engineering and circuit analysis. It is a voltage source that maintains a constant voltage output regardless of the current flowing through it or the load connected to it. In other words, an ideal voltage source has zero internal resistance and can supply infinite current at a constant voltage. In contrast, a practical voltage source is a real-world device that has internal resistance and cannot maintain a constant voltage output when a load is connected to it. The voltage output of a practical voltage source will decrease as the current flowing through it increases, due to the internal resistance of the source. As a result, the voltage across the load will be less than the voltage output of the source, and the difference is known as the voltage drop. In practical applications, it is important to take into account the limitations of practical voltage sources and design circuits that can operate within these limitations. An understanding of the behavior of both ideal and practical voltage sources is essential for designing efficient and effective electrical circuits. You also read more at electronicsinfos. com
What is voltage regulation?
Voltage regulation:(from point of view of electrical machines or generator): It is the change in voltage in between the full loaded and no loaded condition. When there are no loads connected the terminal voltage is equal to the generated voltage in the generator. But when load is connected the terminal voltage is found to be lass than the no loaded condition, due to armature resistance leakage reactance.This phenomena is expressed as, % reg=(Vnl-Vfl)/Vfl * 100%.Which is Voltage regulation. ************************************************************ An ideal voltage source has zero internal impedance. A practical one, even a good one, has internal impedance. With no load on the source, the terminal voltage will have a given value. Once a load current is drawn there will be a voltage drop across the source's internal impedance, and the terminal voltage will therefore drop. The higher the load current, the higher the voltage drop. A regulator circuit, added after the source, can counter the effect of the source's impedance and maintain an output voltage which is more constant than the source itself can achieve.
What is the voltage after 5 milliseconds if the battery is a 12V source?
You will need to add more details. The voltage will always be 12 volts from a 12 volt source until a circuit is completed, discounting any discharging of a battery.
What happens to the voltage in a series circuit when more loads are added?
A: assuming a infinite current source the current will increase accordingly
One that has two of more branches for separate current from one voltage source?
That's a Parallel circuit.
