It depends on how much voltage you have applied.
If you apply rated voltage nothing happens only core losses will be there on the transformer nothing will happen apart from that. If you go on increase the voltage core losses will increase and transformer will get heated up. After attaining the breakdown voltage of insulation, insulation in the primary and secondary will fail and the coils will get short circuited then the coils will burn.
No. A megger's output voltage is not high enough to test the insulation of a high-voltage transformer if, by 'high-voltage transformer ', you mean a distribution transformer or power transformer. Instead, a high-voltage test set or 'pressure tester' (e.g. a 'HiPot' tester) must be used, as these produce far higher voltages.
Step down transformer reduces high voltage of main power line and distribute it to desired level of voltage usable by residence or devices.
the inductive load which is generally use in high voltage transmission line known as transformer. the transformer transform the high voltage to low voltage.
Through the use of the basic transformer voltage equation.
You are probably describing a transformer. The 'high voltage side' of a transformer is the winding with the greatest number of terms. It could be the primary or the secondary winding.
A step-up transformer.
The abbreviation, 'PT', stands for 'potential transformer' (in Britain, the abbreviation is 'VT', and stands for 'voltage transformer'). This, together with a 'current transformer', falls into a category of transformer known as 'instrument transformers'. A 'PT' or 'VT' is used to reduce a high voltage to a level of voltage that can be safely read, remotely, by regular a.c. voltmeters or to provide inputs to high-voltage protection relays, while electrically- isolating the secondary circuit from the high-voltage primary circuit for the purpose of safety.
A voltage transformer (known as a 'potential transformer' in North America) is classed as an instrument transformer. It is used to reduce the voltage across a high-voltage load to a value that can be read (usually remotely) by an ordinary a.c. voltmeter, while electrically isolating that voltmeter from the high-voltage system for the purpose of safety. It can also be used to supply an input to a protection relay.
step up transformer output gives the high voltage which is useful for transmiission of electricity
fly-back transformer.
By connecting a voltmeter across the secondary terminals of the voltage/potential transformer. The transformer acts to reduce the voltage applied to its primary winding, while electrically-isolating the primary (usually high-voltage) circuit from the voltmeter.
yes,we can change the transformer side in transmission line as use of high current or high voltage in output.