It should be fuse 25.
The cost of a lambo door kit for your 96 Mazda b2300 would be somewhere between 199.00 to 359.00.
Can you take a Ford Ranger 1994 bed and put it on a 1994 Mazda B2300? Truth be told, they are the same truck. My 1995 B2300 has "Made for Mazda by Ford" on a sticker inside the door of the driver's side. Also, the Chilton's manual for the Mazda B series trucks are the same as the one for the Ford Ranger.
close all of the door then lock and unlock them>alarm should stop nd car should start
The Mazda truck uses the same heater plenum as the Ford Explorer. Check the Explorer information on www.heatertreater.net for diagnostic and repair information. cgallen
The factory alarm can not be disabled. If you can not disarm this alarm, the switch on the door key cylinder has failed or is not connected.
put ignition key into driver's door to unlock postion.
you use the key to open the door.
You can not disable it. You can disarm it by unlocking the drivers door with the key.
Put the key in the door and then lock and unlock it.
Either front door or trunk should disable the alarm.
Just did a 1995 f150 xlt, it was a pain, finding the wires for the door locks was the worst! Hook them right or you will fry the door motors or alarm! What do you need to know! Wiring diagram, color codes, what type of alarm are you installing! Let me know! I will check back on this site tomorrow!
Check Google.com