0
I'd say its still called a television! Televisions came out for a long time without remotes. Now you can get universal remotes to suit all TVs.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What can you call a TV without a remote control?
The ORIGINAL Idiot Box!
i am going to buy a new tv lg 37lh20 and want to know if my dish network remote control will work with it.?
Call the Dish Network to inquire about your remote and your new TV: 1 866 869-3109 Customer service can advise you and provide a new remote control if needed.
What is the dish network remote control code for apex digital tv?
Try these remote codes: 743, 744, 745, 757. If these do not work, call Dish Network they will be happy to assist you.
How do you turn on a samsung hotel tv without a remote?
The first thing you should do is call the front desk and ask for a remote. You could also just go up to the television and turn the power button on.
How do you use a sky plus remote control?
Select a channel on your TV. Direct the Sky+ remote from the TV and the TV button. Press and hold until a red light at the top of the remote blinks twice. Put in the 4 numbers from the Sky+ and afterwards press the Select. There should be a red light that flashes twice. Codes can be found online at the Sky Remote TV Code Checker.
What remote control will work on a Symphonic TV model WF2066?
For Symphonic TV information and technical questions, just call a Customer Support Representative at 800-256-2487.
How do you make remote control stuff - 5 years old girl?
Remote control can be done many different ways.One example is how a light switch turns a light on and off.Another example is the TV remote control. It has an infrared, or invisible red, beam that is sent to an infrared receiver in the TV. When a button is pushed, the beam sends a message which the TV performs.Other possibilities include radio waves and sound waves.In fact, early TV remote controls were ultrasonic (so high pitched you can not hear it). The remote control had spring loaded hammers that struck a bell that made an ultrasonic beep. The TV has a receiver that listened for the bell, and did things as needed.These ultrasonic remote controls had no electrical part inside the remote. That is why people still call them "clickers", even though the modern infrared types do not click.
How can you receive UHF TV without cable service if the UHF cable is hooked to a VCR and you have no remote for the TV?
Without cable, you can pick up broadcast television signals, VHF and UHF, over the air with an antenna. The typical set-top TV antenna has two elements, the VHF "rabbit ears" and the UHF loop. A roof-top antenna also has both kinds of elements. VHF covers channels 2-13; UHF is all the rest. The antenna may be connected directly to the television (usually, these days, to the round, RF/cable input), or it may be connected to a VCR. VCRs have built-in television tuners and can pass the tuned signal through to the television. This way, even if there is no remote control available for the television, you can use the remote for the VCR to change channels. There are solutions for replacing a missing remote control. - Visit Radio Shack, which carries a large line of "universal remotes," which can be programmed to control almost any home entertainment equipment. One remote can control multiple devices. - Call 1-800-REMOTES, or log on to their Web site, 800remotes dot com. They sell factory-original remotes. - Try searching for your remote on the manufacturer's Web site. But if your model is discontinuted, they may no longer carry the remote. - Try searching for your remote on an auctions site such as eBay. (Observe appropriate cautions.)
What to do when virgin media box does not connect t the TV but it does to the remote?
you call an electrician
How do you get replacment TV remote for sva TV?
Try this!!! Technical Support, call Customer Service at: 888.8.ASK.SVA WARNING: If you call them, however, they will tell you (falsely) that the only remote that will work for your TV is the one they sell (for a ridicuolous amount of $). I just purchased (1-09) a GE 24912 universal remote that has 2 codes for SVA and the first (0216) worked for my TV (the other code is 0212). I don't know if these codes would work with another remote, but give it a try if you already have a universal.
Where can you buy a remote for kcpi dt504 digital tv converter box?
you have to call 9098612929 or buy it off ebay
How did the remote control get the nickname of clicker?
REMOTE!!!!!!!!!!!! Clicker! NO! Defenitaly Remote! :) I strongly disagree because us Mainer's call it the Clicka not the clicker or the remote control of even the fridge.
