A circuit in which electricity only flows in one path is called a series circuit.
A circuit with more than one path for current to flow in is called a parallel circuit.
A series circuit only allows the current to follow one path. All other circuit types contain one or more parallel paths that the current would split between.
A closed circuit in which the current divides into two or more paths before recombining to complete the circuit. The voltage remains the same throughout the circuit.
Current will tend to take the path of least resistance in any case. That's its nature. A short circuit (or "short") is a low resistance current path that current will follow if it appears.
Simple parts of a circuit are switches, light bulb, battery and connecting wires.
All the branch circuits in your house are parallel. They have a constant voltage applied to any device plugged into an outlet. If you thought about an analogy for a parallel circuit, imagine that the rails on each side of rungs represented the hot and neutral wires of a typical household branch circuit. The rungs would be the loads connected in parallel. Each "load" draws the current needed to operate the specific device. The sum of all the currents for the "loads" is equal to the total current being supplied through the circuit.
Ohm's law states that "The current is directly proportional to the applied EMF (voltage) and inversely proportional to the resistance in the circuit." <<>> if resistor exists, resistance decreases according to ohm's law, current is directly proportional to voltage and current is inversely proportional to resistance it means as current increases, voltage increases. resistance increases, current decreases so as voltage if there is no resistor, there should be no resistance except internal resistance of voltmeter and ammeter
yes
A circuit that has more than one path for the current to flow is a parallel circuit. The circuit must have two or more paths to be considered parallel. A circuit that has only one current path through multiple components is a series circuit.
Because there is only a single path in series circuit and many paths in parallel circuit.
That really depends on how the circuit is designed.
That really depends on how the circuit is designed.
one
In a series circuit, current has to pass through each part of the circuit. In a parallel circuit, the current has several alternative paths.
A closed circuit in which the current divides into two or more paths before recombining to complete the circuit.
At least two.
electricity take every possible path which follow closed path across its source.AnswerIn a series circuit, there is only one path for current to flow; the same current passes through each component.In a parallel circuit, there are multiple paths called 'branches', and the sum of the individual branch currents is equal to the current drawn from the supply.
DATA WILL BE SENT IN DUAL YET IN SERIES DATA WILL BE SENT IN ASINGLE LINE
This is a parallel circuit, each of the parallel current paths draws a certain current, and the input current equals the output current, so the sum of all current through each path has to equal the total current.