The timing is controled by the ecm.
Answeri looked in a book for this car and it said the cam at top has a pointer on the pully and has to line up with a dot on the block which is rite behind the pully, now keep in mind there is a plastic backplate that will have to be removed before you can see it, now the crank, which is at bottom will have a mark on block also, line the keyway on crankshaft with the mark,it's going to be alot of work just to get to where you can see these marks, may even have to raise the engine before you can line these up, make sure you keep a check on no.1 piston when setting cam shaft, no. 1 has to be up when you line the marks, good luck and have fun.
There are no timing marks. The timing is controlled by the PCM. Power control module. It is not possible to set the timing with a timing gun.
It has no timing marks because the ignition timing is set by the computer and isn't adjustable.
May be computer controlled and not adjustable
There are none. The cam needs to be set with a plate and use pins to set the crank and fuel pump pulley.
"How to set timing on 1991 ford escort lx 1.9?"
Im replacing the timing belt on a 1995 Ford Escort 1.9L. How do I Set the timing on it?
The timing marks on your Isuzu 4hf1 engine can be set by looking at the timing marks on the timing belt pulley. The timing belt marks are facing towards the front of the automobile.
You can set the camshaft timing on your automobile by lining up the timing marks. There will be timing marks on the front main pulley and timing marks on the camshaft.
There should be timing marks on the pulley & you simply align them. Crank at 12/cam at 6.
The timing marks on your Isuzu 4hf1 engine can be set by looking at the timing marks on the timing belt pulley. The timing belt marks are facing towards the front of the automobile.
how to set the timing marks on a 1995 Mitsubishi Montero
There's no way to set timing. Just align marks on camshaft and crankshaft during belt installation. There may be another problem if your car is still running rough.