answersLogoWhite

0


Best Answer

First of all, pay attention to what you are doing and what you are working with.

Always wear safety glasses or goggles when working with dangerous chemicals.

Know where the laboratory safety equipment is located.

Tell the instructor of any accidents immediately.

Keep food and drinks out of the laboratory work area.

When dealing with chemicals, always read labels carefully to be absolutely certain that you have the right chemical.

Sometimes you will be told to use a certain concentration of a solution. In those cases, be sure you check the label for concentration as well as the name of the chemical.

Never mix chemicals that you haven't been told to mix without an "okay" from the instructor.

If you spill a chemical, wipe it up immediately andadvise the instructor. Be sure to let the instructor know what you have spilled.

If you get any chemical on you, rinse it off immediately with lots of water and let the instructor know what you spilled on your way to rinsing it off.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

12y ago
  • Each person is responsible for maintaining order at his or her

    workstation. Objects that are not being used, such as tools, clothing and

    instruments should not be allowed to clutter the work area.

  • Power should be switched off at the breaker when one is leaving the

    laboratory. The person in charge of a specific connection should check

    that voltage, gas, water supplies, etc., are turned off when work is

    completed.

  • Additional safety and work instructions apply for work in the highvoltage laboratory and outdoor test plants.
  • When conducting measurements with equipment that have a large shortcircuit power the measurement cables should be supplied with special current limiters.
  • Extreme caution should be exercised when carrying out measurements

    with an oscilloscope. The ground rule is that the chassis of the

    oscilloscope should be connected to zero potential (neutral) and that

    voltage probes be used with voltages exceeding 250 V.

  • In the case of special measurements where the oscilloscope is subjected

    to high voltages (with respect to ground) it shall be clearly marked with

    warning signs and be mechanically isolated so as to prevent any

    unintentional contact with the apparatus.

  • When using variable voltages the connection instructions for each

    additional voltage source shall be scrupulously followed.

  • Connections to the main switchboard for the distribution of variable

    voltages may only be carried out by the Electrical Safety Supervisor or

    someone appointed by the Supervisor.

  • Motor terminal boards for variable voltages are equipped with blade

    fuses for 16, 63 and 200 A respectively. A fuse box shall be used in

    cases where these fuses are deemed to be too large.

  • Fuses or circuit breakers may only be re-set after the cause of the fault has been identified and corrected. This procedure may only be carried out by the Electrical Safety Supervisor.

    Ear protection should be used during tests with large surge generators as large discharges or many repeated discharges typically occur.

  • The eyes should be protected during the use of ultra-violet lamps. Not only direct light, but even indirect light, for example in the form of reflections, can cause irritation and pain which first occur some time after exposure Those who work in the laboratories and workshops should be aware of the risks involved and should thus work with consideration and caution, having regard for their safety as well as that of others.
  • All persons present in the laboratories and workshops must exercise

    caution around connections that may be live. Never touch equipment or

    connections unless you have personally verified that the circuits are dead.

  • Never take automatic protective devices for granted. Always maintain a

    sense of personal responsibility and caution.

This answer is:
User Avatar

User Avatar

Wiki User

12y ago

1. Wear clothing that won't get caught in the machine and

Keep the area around the machine clean

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

Safety and health precautions in computer

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What are the safety procedures when using mechanical equipment?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What are the health and safety procedures for using different types of equipment?

The health and safety procedures for using any equipment is whatever the manufacturer has specified in labels and user manuals.


What are the approved procedures for using safety equipment?

Approved procedures for use of any equipment, safety or otherwise, differ from workplace to workplace and are also different for different kinds of equipment. You must learn the procedures of you specific location and equipment by reading instructions, attending a training class, or receiving instruction from your supervisor or another designated person.


What are the main causes of welding accidents?

The main causes of accidents using welding equipment is lack of care during safety procedures. It is important when dealing with dangerous equipment to also follow the correct safety steps.


What are the standard operating procedure in handling the equipment?

The Stanard Operating Procedures or SOP's are how to operate safely and effectively the equipment on site. There should also be a section for what to do in an emergency, how to shut down to prevent mechanical meltdown. Before using this equipment you should have to sign off that you have read the SOP and are familiar with it.


What is a reason for using the personal protective equipment?

safety.


What equipment if any are you prohibited from using in health and safety?

There are no universal prohibitions on the use of equipment for health and safety. Some equipment will be forbidden in certain situations but not in others.


How do you fix a radio in a 97 bmw528i?

-- Using appropriate test equipment and logical test procedures, identify the component, section, or connection that has failed. -- Using suitable mechanical and electronic tools and materials as required, repair or replace the faulty connection, component, or section of the radio.


Safety factors and recognised standards of equipment and materials for children.Importance of using equipment for the age?

identify the equipment and materials needeed for embroidery


Safety Symbols inside the laboratory?

These could be to warn you of dangerous materials or behaviour. (acids running) They could be to advise of safety procedures. (Fire escape, eye wash, first aid.) They could be to aid you in using safety equipment. (fume cupboard, fire extinguisher)


Follow OHS standards and organisational policies and procedures when using computer input equipment?

Yes, do that.


What type of safety protection do you need for standard welding equipment?

"While using welding equipment, you should always wear safety googles and protective gloves." Make sure you have on a welding jacket and long pants when you're using welding equipment. Those sparks can be very dangerous.


How could wearing the wrong type or size of safety equipment or clothing lead to an injury?

When using safety equipment you should make sure that you are wearing the right size. The wrong size of safety equipment can be more dangerous than wearing no equipment. When it does not fit you well it will not cover the correct areas it is designed to protect