There are 3 principal chemicals for lowering pH: muriatic acid, sodium bisulfate (dry acid) & CO2. If this is a commercial application then CO2 may be a viable source. The sodium bisulfate is dry acid which when mixed with water makes liquid acid but does not have the odor. Muriatic acid and sodium bisulfate both lower total alkalinity at hte same time as lowering the pH. CO2 may raise total alkalinity at the same time as lowering pH. The total alkalinity is important to have a stable pH which in turn is important to have a relatively constant pH for the proper effectiveness of the sanitizer (chlorine) Any other questions feel free to email me direct. Steve Dunn Commmercial Pool Systems, Inc.
you either use an Acid or you further dilute the solution with lower alkalinity water.
The alternatives to using muriatic acid to clean grout smears from natural stone is a mixture of water and vinegar. First wipe away heavy grout with a damp sponge, then apply the vinegar-water mixture to the affected area. Allow it to sit for a few minutes before using a scrubbing brush to remove the stains. Wash away the residue with a damp sponge.
Both are lowered using muriatic acid or pH reducer from your local pool supply store. thepoolandspawarehouse.com
That Acid is called Muriatic Acid. You put it in your swimming pool to lower the PH of the water. At lower PH Levels, the chlorine you use to sanitize the pool is more active, as a disinfectant. You MUST be careful not to put too MUCH Muriatic Acid in your pool! PH that is too low will create potentially deadly fumes, so test your water. Low pH is corrosive to plaster and metal pool parst.
If the water you are intending to use has been brought to Ph of 7.2 as is normally done in swimming pools then there is no problem at all using it to water plants. No. Do not use this acid mixed with anything to water your houseplants. Muriatic acid is extremely dangerous and is a matter between life or death Please check out the weblink at the lower left and you will see why. You can also ask an employee of a pool supply company if this is a dangerous practice or not.
No, conditioner is added to water to help mantain chlorine. Muriatic acid is used to lower pH or alkalinity.
You lower the Ph by using Muriatic acid VERY carefully. This acid and it's vapour is dangerous. With the pool pump ON, carefully add 1/4 gallon at a time, waiting 6 hours then testing.
I would not recommend using Muriatic Acid. It is far to strong for this use. Purchase a good industrial carburetor cleaner.
You can't! Muriatic acid (~32% HCL) will not add any free chlorine to the pool and will not function as a oxidizer (Shock).
There are no convenient alternatives to using a thermometer to measure body temperature.
Two alternatives are Hydroelectric and Geothermal.
Theoretically, if the interest rate on your overdraft is lower than the rate on your other alternatives (not likely), you pay less on the bottom line.
lower government taxes, encourage small business start ups, combat polititians rorts in poor countries