There is a serial number break on that machine at #140001. Below that both belts are:
M82612 36.22" X 1/2"
And after that:
M122421 37" X 1/2" for the auger and
M118011 33" X 3/8" for the drive
service manual unit John deere
The 42 inch deck belt is 104 X 1/2 inches.
Deere"s number for the auger is #M123224 and drive is #M110637 which is 31" x 1/2" and 30" x 1/2" respectively.
how do you tighten belt on T155 john deere
diagram to install belt on john deere l120
How Do I change A drive belt on a John Deere LT190?
i need a diagram for installing a belt on a john deere lawn mower 330
The John Deere 48 mower deck belt pattern diagram can be obtained from most John Deere dealerships. Many times when you purchase the belt the parts store will give you a belt pattern diagram.
Belt# M123281 crosses over to Oregon part #75-297 and the dimensions are 1/2"x142-3/4"
Check with your John Deere dealer. No, not Home Depot or Lowe's but an actual business that works on and sells John Deere mowers.
You have to remove the black belt cover between the engine & shoot held on with 2 bolts. Next you will need to separate the auger housing from the unit. This is done by removing the 2 bolts just below the black belt cover now you have access to both the drive & auger belt. Upon resembling make sure when the 2 units go back together that you have the notices on both sides on the bottom of the unit together.
How do you change a mower deck belt on a John Deere L130?Read more: How_do_you_change_a_mower_deck_belt_on_a_John_Deere_L130