No problem
With a timing light.
There is a rubber grommet in the clear pane of the dash, remove it and insert a long pointed object, ie. a skewer and push the button while engine is running and the t-belt warning light will go out. This should only be done if timing belt has been replaced, engine failure may result if belt is not replaced.
NO. A timing light will not work on that engine. You must have an obdII engine scanner to set the timing on that year.
The check engine light is for emission and electrical issues. It doesn't have anything to do with fluid levels. As far as the timing belt it depends if the light just came on, or if it has been on since the replacement.
You CANNOT use a timing light on that engine. ( won't work ) It requires an OBDII engine scanner to set the timing. The timing is computer controlled.
It does not have one. You can not use a timing light on that year engine. The timing is computer controled. You MUST have an engine scanner to set the timing.
Wrong scanner?? If a check engine light is on, there are codes. Timing sensor? Check engine usually means a problem... Service means that scheduled service needs to be performed like oil change, or timing belt replacement. I would Check your Catalytic Converter. What often happens is the catalyst that is in the Catalytic converter Heats up and Blows out into your Muffler. This means It is not the sensor,but your converter and Muffler Need Replaced.I have just fixed two cars with this problem,and they had the same symptoms,Check engine Light.
A timing mark is usually a white line on the timing belt to sync the firing of cylinders in an engine. You can see this line when the engine is turned off or with a timing light also a strobe light when the engine is running.
It's a tool that helps you adjust the timing of your engine.
NO there is not. The timing on that engine is computer controlled and it REQUIRES an engine scanner to set the timing. A timing light will not work.
The timing on that year engine is computer controlled. It requires an engine scanner to set the timing. YOU CAN NOT USE A TIMING LIGHT.
Most auto part stores can and will scan vehicle and detemine problem