Sears remote keypad model 139.53684 I do not know the password how do you reset the password?
USING THE MULTI-FUNCTION DOOR CONTROL: Enter a four-digit personal identification number (PIN) of your choice on the keypad.
Then press and hold ENTER.
While holding the ENTER button,
press and hold the LIGHT button on the Multi-Function Door Control.
Continue holding the ENTER AND light BUTTONS
WHILE YOU PRESS THE PUSH BAR ON THE Multi-Function Door Control (all three buttons are held).
Release buttons when the motor unit lights blink.
It has learned the code. If light bulbs are not installed, two clicks will be heard.
This information was found on a competitors web site for the same model Keyless entry model 976 key pad. ------------------------------------------------------------------------------ I don't have a Multi-Function door control with a light button, so I had to change the instructions slightly. My garage door opener has a learn button on the overhead unit. Here's what I did and it worked! 1. enter your chosen 4 digit code on they keypad. 2. Press and hold the "enter" button. 3. Press and hold the learn button on the overhead unit. 4. When overhead light blinks, release both buttons. Thank you soooooooo much to Paul Messer for the original instructions. I purchased a new home and the previous owner
didn't leave the instructions. I've been at my new house for about a year and I can finally use my own keypad!
http://www.bobvilla.com/wwwboard/messages/147096.html ------------------------------------------------------------------------------ We recently purchased a HUD home and were having the same problem since we didn't have the original code. We have a Craftsman 1/2 HP door opener which has a learn button, the method that worked for us is (This could require 2 people, but I took the keypad off so I could do it myself):
- With garage door closed, "Press" and "release" orange learn button on the over head unit.
- Within 30 seconds, enter your desired 4 digit code on keypad and press "enter."
- Overhead light blinks, your done
- Test your 4 digit code
4 people found this useful
How do you reset the parental password on your PlayStation 2 if you don't know the current password?
Answer . Press "select", and then enter 7444. It will then delete the current pasowrd and ask for a password registration. You can then enter your new pasword.
Answer . There are 2 ways to program a remote to open a garage door. 1 if the opener uses dip switches, open the cover and see if it has a row of switches that can be put …into 1 of 3 positions, if so just make the remote match the opener. 2 the opener will have a " learn " button on it, press it and then press the button on the remote and it will learn your remote signal.
No matter what internet program that you're using there is a methodfor changing or resetting your password. Most login screens willhave a prompt that states, "forgot your pass…word?". By clicking onthis you will be brought to a new screen in which will likely askfor your email address. Once you provide them with this informationa new email will be sent to you with a link and instructions on howto reset your password.
usualy when you go to login to a website there is something at the bottom that says forgot password? you click on that and fill out the info then they send you an email.
Usually (iPod/iPhone) you can plug your device into your computer (iTunes). If its an Internet program it may have asked you for an email when signing up for it.. There should… be a link 'forgot my password' and it will email you a new password or you will make another one via that email.
you can put into iTunes and there should be a option that says restore or back up, one of them should work, if I'm not mistaken
i need reset password for smasung sgh-x210
When on input password screen, press select for delete password. Then enter 7444. Then choose new passcode.
Go in available networks list, and find your router. It should have some default name which you can find in the router's manual. When you find it, connect to the network. Then… open the browser and type in the address field the default ip address (in manual). You will need default password. If you do not have manual. You can find all required information in internet.
you go to command prompt or cmd and type in net user whatever his name is * then change the password
In Windows XP
restore the ipod to factory conditions
You have to go through a reset password system. Most computers do have it. Just look for it.
If this doesn't work for you. Here is what I just did on my older model Sears garage door opener with ("NO ENTER BUTTON" on the keypad) and it worked perfectly. 1). Unplug the… unit from the ceiling plug or where ever it's plugged into. 2). If you have a large wired button to open the garage door (about 5" x 3") remove it from the wall and flip it around to expose the underside of the unit. Remove the 3 screws carefully that hold the circuit board to the casing remembering where they go when you reconnect them. Two of them should have wires attached to them. 3). replace the 9 volt battery and locate PROGRAM / OPERATE switch and place it in the "PROGRAM" mode. Go to the keypad and enter you choice of 4 numbers. 4). place the switch back to "OPERATE" mode, replace the 3 screws to their original terminals, mount back on the wall, plug in the opener to the ceiling plug and you should be good to go. After 12 years of living at this house and never having access to the keypad was bothering me. I finally figured it out. I hope this helps someone in the same position Good luck
go to administrator and set password| If you want to reset the Windows passwords I suggest you to use this password reset tool http://www.resetwindowspassword.net
Connect to iTunes and restore factory setup. This will erase your iPad, including all apps and content. Don't forget your Passcode!