answersLogoWhite

0


Best Answer

If all of your figures are correct, your total cost will be $3942.90

good luck on that

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Roofing material costs 74.52 per square 10 ft x 10ft the roofer chargers 65.75 per square fir labor plus 9.65 per square for square find the total cost for 26.3 squares of installed roof?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

If I remove ten squares of roofing how many cubic yards of roofing waste?

3-4


How many square feet are in 400 roofing squares?

40,000


In roofing measurements how many squares is a 30x30 roof?

A 30ft X 30ft roof would be 9 squares


How many roofing squares in a bundle?

3 bundles makes one sq


How many roofing squares are area 16' x60'?

There is 100 sq ft to one square. So, you will need 10 squares.


What is the formula for figuring roofing square?

a roofing square is 100 sf. There are formulas out there that allow you to use the pitch and outer dimensions of the roof to figure out the number of squares. If not, calculate the square footage and divide by 100 - that's the number of squares you have...


If your house is 1750 sq ft how many squares of roofing material do you need?

will need more info than just house sq footage.... what is the roof pitch, how big are the overhangs, how many valleys


Searching for the best deals on roofing repair in the Orlando area.?

Hometown Roofing Contractors gives the best deal on roofing repair in Orlando, Florida. Depending on the quantity and size of the squares, repairment at Hometown Roofing Contractors can cost as little as $250.


How many squares of roofing it takes to make a ton?

75= 1 yard 142= 1 ton


How many squares of roofing will a box of nail coils complete?

There are approximately 250 nails to a roofing coil. When you buy them in a case they typically have around 7200 nails total. Hope that helps!


How many squares is 80 square metres?

I assume you are refering to roofing material, since a "square" in the roofing industry is equivalent to 100 square feet of material. 1 linear meter equals 3.28084 feet 1 square meter equals (3.28084 ft)2 or 10.7639 square feet Therefore, 80 square meters equals 80 x 10.7639 square feet or 809.93 square feet Since a roofing "square"=100 sqft, 80 square meters equals 8.0993 "squares" If you don't want to carry a calculator around in the field, just remember that: 1 square meter is a bit under 11 square feet. and that 1 square of roofing will cover almost 10 square meters (but not quite) Rod Burrows, PE


How many bundles of roofing would you need if your roof requires 55 squares?

165 + 5% or so for mistakes