1. Mmanually turn on the device (TV, DVD, etc.)
2. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button.
3. Press and quiclkly release the desired mode button 9TV, DVD, etc.). The red indicator blinks off once.
4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device (TV, DVD, etc.) changes channel. The red indicator blinks once with each button press. If you accidentally overshoot the code required, use the CHANNEL DOWN button to backtrack through the library until the device again changes channel. Pressing the CHANNEL UP changes direction to forward again.
5. Press and release the MUTE button to install the code.
or try these
002 009 109 202 209 210 310 402 408 508 510 807 901 914 917 good luck its one of these!
The codes relate to the tv set and not the remote. Google the set or sanyo and you will get the code. You then need a universal remote to programme to that code or the instructions for the Philips remote to see if that can be reprogrammed. Again Google Philips and the make.
You can find Philip universal remote codes either on the Philips site or the site for the universal remote. Also some cable/satalite providers carry remote codes for the different devices.
What are the codes for a panasonic tv phillips universal remote c1035a
comcast hd box
ich bitte um codeliste von RC8500 danke dr.p.nepo@web.de
what is the code to program a Sony TV with a philips universal remote
Philips has excellent product support which you can access through their website.
Philips universal remote controls can operate audio and video devices of any brands. You have to enter the code of the device in the universal remote control. The codes are usually found in the manual or you can search through the library of codes by using the Code Search button of the remote.
These remotes can be found @ Walmart or Superstore for 8 dollars, a little more than what it costs 2 replace the batteries! You can contact the Philips Customer Care Center at 1-888-PHILIPS for the proper codes for your remote.
I purchased a Philips model# SRU5107WM17 remote and had same problem with my Mediacom cable/dvr. Could not find the codes in the in package nor on the Philips website. I had to do some research. Not sure what brand of cable box you have but I have PACE and the Motorola codes worked for my Pace cable/dvr box. The code I used was 1077. If Motorola codes don't work, the Scientific Atlanta codes work for some Pace cable/dvr boxes. It is a shame that between Mediacom and Philips don't help customers out better.
I just picked up a Philips DVD3150C DVD/VCR at at thrift store for $5 without a remote. My universal remote that I already had on hand is a Philips SRU4105WM/17. This remote worked perfectly with the DVD3150V. The codes were 0598 for the DVD and 0230 for the VCR. By the way, I love this Philips remote; I've been able to use it for everything in my hodge podge collection of gear.
I have a Sanyo tv and a magnavox dvd,what are the codes?