For Two Connectors on a motherboard for two 40-pin data cable.
Depending on the drive being installed you have to use either a serial ATA interface, or a paralell ATA interface. The power/data connectors are different so you would not be able to interchange the cables.
Drivers are connected to the motherboard with ribbon cables or thinner SERIAL ATA cables.
Cable connectors are always avaible for printer cables.
Drives are linked by cables called SATA cables, these send data through the motherboard
SATA cables.
- How hard drives and other drives interface with a computer system (type of cables and connectors used by drives, motherboard or expansion cards) - Data speeds and transfer methods between the drive controller, the BIOS, the chip-sets on motherboard, and the OS
- How hard drives and other drives interface with a computer system (type of cables and connectors used by drives, motherboard or expansion cards) - Data speeds and transfer methods between the drive controller, the BIOS, the chip-sets on motherboard, and the OS
They are the cables that connect your hard drive or cd/dvd drive to the motherboard.
Parallel ATA (PATA) is an IDE standard for connecting storage devices like hard drives and optical drives to themotherboard. PATA generally refers to the types of cables and connections that follow this standard.It's important to note that the term Parallel ATA used to simply be called ATA. ATA was retroactively renamed to Parallel ATA when the newer Serial ATA (SATA) standard came into being.PATA cables are long, flat cables with 40-pin connectors (in a 20x2 matrix) on either side of the cable. One end plugs into a port on the motherboard, usually labeled IDE, and the other into the back of a storage device like a hard drive.Some PATA cables have an additional connector midway through the cable for connecting yet another storage device.PATA cables come in 40-wire or 80-wire designs. Most modern storage devices require the use of the more capable 80-wire PATA cable to meet certain speed requirements. Both types of PATA cables have 40-pins and look nearly identical so telling them apart can be difficult. Usually though, the connectors on an 80-wire PATA cable will be black, gray and blue while the connectors on a 40-wire cable will only be black.Also Known As: PATANote: Even though PATA and SATA are both IDE standards, PATA (formally ATA) cables and connectors are often referred to simply as IDE cables and connectors. It's not a correct usage but it's very popular nonetheless.Examples:"My motherboard has 4 slots labeled IDE. I used a three-connector PATA cable to connect my hard drive and CD burner to one IDE port and used another PATA cable to connect my backup tape drive to the second IDE port. It's good to know that I have two more IDE ports left on the motherboard for future use if I need them."
Cable connectors are used on coaxial cables, which are ports in the wall that connect to a TV. The connectors are used to either link together two coaxial cables or split it off into more than one.
If the DVD player doesn't have COMPONENT connectors, you will have to use a input on the TV that has RCA input connectors.
There are a lot of electronic stores that sell cables and connectors. Some of the best places to purchase them from are Best Buy, Future Shop and Walmart.