Did you remember to turn the supply line back on? Was there a plug that needed to be removed before connecting it?
Have you turned on the shutoff valve below the sink .
form_title= Shower Faucet form_header= Install the shower faucet you want in your bathroom! Do you have a working faucet in your bathroom?*= () Yes () No () Not Sure What type of faucet do you want installed?*= _ [50] Do you want the shower faucet to include a massager?*= () Yes () No () Not Sure
form_title= Bathroom Sinks and Faucets form_header= Install new bathroom sink and faucet. What is your desired style?*= _ [50] What type of finish do you want on the faucet?*= _ [50] What is the square footage of the bathroom?*= _ [50] Do you want a pedestal sink?*= () Yes () No
form_title= Bath Faucets form_header= Create your dream bathroom with a new bathroom faucet! What type of faucet do you want installed?*= _ [100] How many bathrooms are in your home?*= () 1 () 2 () 3 () 4 What is your budget for the faucet?*= _ [50]
The problem could be as simple as a clogged screen in your faucet. It also may be a low flow gasket which is in the faucet to reduce water usage. Has this alwys been a problem or is it a new problem?
yes turn the water off and get someone to help you put in the water faucet
more flow but do not last as long as beveled ===
To raise the height of an outdoor water faucet, the best thing to do would be to get an extension for the existing pipe that will bring the faucet to the height desired. Remember to turn off the source of the outdoor faucet before starting this project. Remove the faucet valve, screw in the new pipe, replace the faucet valve. Sealing the ends of the new pipe with plumber's tape is also a good idea.
Check the shut-off valve for the hot water side that's under the sink and make sure it's fully open.BECAUSEThe installer did NOT remove the aerator prior to the installation and the flow restrictor is blocked
There was air in the line. When you turn off the water with the faucet running make sure you turn it back on with the faucet open. That will release any air caught in the lines. That faucet shut with one on a lower floor on and restoring water does not work. Fast and easy. 1. turn on affected faucet 2. shut off water 3. turn water back on 4. faucet should be running smoothly now
Very simple. Run each faucet until there is no more air. This usually only takes a minute or two per faucet. Remember air is lighter than water and will quickly rise, thus exiting the faucet additionally the strong flow of water out of the faucet is a huge plus.
"Make sure you have the correct sized faucet and the correct tools. Turn off your water and then remove the existing faucet. Replace it with the new one, making sure it is sealed so that no leaks can occur when you turn your water back on."
Get an adaptor