answersLogoWhite

0


Best Answer

blinker switch is part of that system is most likey problem trust me i owned 9 s10 all 82-94 and college for 5 years of elec/auto replace the blinker switch on the clolume"

User Avatar

Wiki User

17y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: No brake lights on 93 Chevrolet S10 you have replaced bulbs fuse and switch?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

On a 1991 Chevrolet what would cause brake lights to remain on when car is switched off?

Check the brake switch located on your brake pedal shaft. May have to be replaced.


You replaced the brake switch on a 96 Chevrolet pickup and now the transmission wont unlock when the brake pressed down unless you turn the truck off?

try swapping wires on brake light switch--do stop lights work?


Have a 91 Chevrolet Z71 4x4 All lights work except brake lights Seems there is no power going to brake light switch Help?

have power to fuse box but not brake lgt switch new bulbs all wiring ckd brklgt switch replaced. this should be up with my question new here oops


Why do the brake lights come on and off as they wish on your 1999 Chevrolet Suburban?

Replace brake light switch.


Why won't the brake lights shut off on a 1998 Cadillac Catera?

Brake switch needs replaced.


Why would the brake lights stay on whenever the car is on even after you have replaced the brake light switch?

Out of adjustment. Adjust the mounting of the switch so the brakes lights are off until you press the brake pedal.


Where can you find a diagram of brake system for 1986 Chevy pickup?

i have tail lights but do not have brake lights nor do i have turn signals. i have replaced brake switch and all bulbs


All lights work except the brake lights and 4 ways you replaced the brake switch and flasher still nothing Is there a relay or something I are missing?

The turn signal switch overrides the brake light circuit while the turn signals are on. If the switch is damaged or worn out the brake lights won't work.


1985 bronco brake lights dont work but all other lights do work you replaced brake light switch and bulbs?

Check the brake light fuse. If you have 12 volts at the brake light switch I would suspect the signal light switch is at fault.


Your 1998 mercury mystique brake lights don't work is there a sensor that needs to be replaced or just a fuse?

check fuses & brake lights switch located on brake pedal


What is the problem when the hazard lights on a 1990 Chevrolet Silverado wont turn off so took the fuse out but then no brake lights or blinkers.?

Change out the switch. Bad switch!!


What causes the brake lights to fail when all other lights are working fine?

The BOO (Brake On/Off) Switch may need to be replaced. If it is bad, it would cause the brake lights to NOT illuminate when the brake pedal is applied.