Running current. The locked rotor amps are only seen at initial start up which only lasts a fraction of a second to one or two seconds.
An a.c. generator produces alternating current, whereas a d.c. generator produces direct current.
A DC generator, or "dynamo", is very similar to a DC electric motor but cannot be described as "exactly the same as a motor" because a DC generator's designed purpose is not to "use" electricity (which a DC motor does) but to "make", or "produce", electricity.
Induction motor is an AC electric motor which uses electromagnetic induction to induce the electric current in the rotor to produce torque.
slip power is a power which is develop by the induced voltage and current in an induction motor
the cosine of the angle between voltage and current of generator is called power factor (pf) of generator.
If you mean electromagnetic induction, there are a lot of ways. For example, an alternator (that is a generator of AC current) works via electromagnetic induction. The headlights of a bicycle are powered via induction (bikes have a magnet in the wheels and when you pedal the magnetic field rotates thus creating current).
There is a motor in a generator which carries out this electromagnetic induction,as we switch on the generator the magnetic field lines between that motor get cuts off by the rotating coil which cause change in flux and change in flux cause induced emf,cue to emf at different points of coil cause current to get flow and then generator will get on.
when the dc generator is loaded current will be drawn from it, therefore a back emf Will be generated, which opposes the motion of a generator, and hence, that opposition loads the three phase generator
Lester Eugene Stutz has written: 'The design of an induction motor, single phase double current generator set' -- subject(s): Electric motors, Induction, Induction Electric motors
An asynchronous alternating-current machine, such as an induction motor or induction generator, in which the windings of two electric circuits rotate with respect to each other and power is transferred from one circuit to the other by electromagnetic induction.Reference: Wiki Answers
Induction occurs only with alternating current.
Electro-magnetic induction . a rotating force-field, so to speak. sounds very sci-Fi but a basic electrical device.
To draw current from a generator, you need to connect a load to it.
It is technically an alternating current generator.It is technically an alternating current generator.
Faradaic current is associated with electromagnetic induction.
An electrical generator is a device that converts mechanical energy into electrical energy. The fundamental principle behind its operation is electromagnetic induction, a phenomenon discovered by Michael Faraday in the early 19th century.
An a.c. generator produces alternating current, whereas a d.c. generator produces direct current.